2024 Canadian Poncho Calendars are Now Available! CLICK HERE

 

 

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: SD Hubcap Restoration


Addicted!

Status: Offline
Posts: 376
Date:
SD Hubcap Restoration


Hello All

I have been looking for someone or somewhere that restores these things and come up empty. So I decided to take one with curb rash and dents all over it and see if I could knock out some of the dents. I used a variety of tools to get into the tight spots and almost left it worse than i started, so I gave up frustrated. A friend recently gave me a couple more caps with curb rash on them, but they had nice spinners. So I decided to try again to see if I could repair the dents and straighten them out. This time I designed and built some crude tools that would help in my effort without making new damage.

I still have a few more adjustments to make and maybe a jig to hold the cap in place but I am getting close, other than the curb rash, I think the cap turned out fairly well. I am going to continue playing around with these things to I get them closer. Not sure yet if it is possible to sand and polish out the scratches but I have loads of time to try.

Maybe this post should be in the hobby section.

(see before and after photos)



Attachments
__________________

65 SD Convertible



Canadian Poncho Superstar!

Status: Offline
Posts: 6749
Date:

Yeah these are a challenge aren't they Lawrence. I've filed, sanded, and polished some curb rash out and was quite pleased for the first effort. I have a friend who is a very good welder and he offered to teach me to weld stainless and fill in some of the worst gouges but I haven't had a chance to try. I sold the farm and bought an NOS one on ebay last year and then found one as nice for a lot less at the Tradex swap meet this year. I have a bunch of them waiting for me.

__________________
Jerel


Canadian Poncho Superstar!

Status: Offline
Posts: 4505
Date:

I have a bunch of mag-style wheel covers. The construction is stainless steel rims with cast metal centers. They are heavy and seem to suffer from road rash badly, perhaps because they are larger or because they are heavier and can fly off. Wheel covers generally are made of stainless steel which remembers all the scratches. If you are desperate you could try bending any tangs to disassemble, then polish with progressively finer compound. Deep scratches, there are places that restore wheels that would be equipped perhaps to handle them. Wheel covers are different than wheels in that the material can't just be polished down through scratches, unless you don't mind them being thin.



__________________

67 Chevelle Malibu Sport Coupe, Oshawa-built 250 PG never disturbed.

In garage, 296 cid inline six & TH350...

Cam, Toronto.


I don't judge a man by how far he's fallen, but by how far back he bounces - Patton



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

IMG_3194.JPGIMG_3195.JPGIMG_3196.JPGIMG_3198.JPGIMG_3204.JPG



Attachments
__________________

 



A Poncho Legend!

Status: Offline
Posts: 48633
Date:

ROSIES CAR wrote:

Hello All

I have been looking for someone or somewhere that restores these things and come up empty. So I decided to take one with curb rash and dents all over it and see if I could knock out some of the dents. I used a variety of tools to get into the tight spots and almost left it worse than i started, so I gave up frustrated. A friend recently gave me a couple more caps with curb rash on them, but they had nice spinners. So I decided to try again to see if I could repair the dents and straighten them out. This time I designed and built some crude tools that would help in my effort without making new damage.

I still have a few more adjustments to make and maybe a jig to hold the cap in place but I am getting close, other than the curb rash, I think the cap turned out fairly well. I am going to continue playing around with these things to I get them closer. Not sure yet if it is possible to sand and polish out the scratches but I have loads of time to try.

Maybe this post should be in the hobby section.

(see before and after photos)





You're a better man than I. When I had my 65 Canso SD I had the original caps and wanted to restore them. It didn't take me long to give up. Next to impossible to get to most of the dented areas.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



A Poncho Legend!

Status: Offline
Posts: 20744
Date:

They are hard because of the double-wall around the lip, but I've managed to pop a couple '64 CS caps back into shape. I haven't tried to polish them yet.



__________________

Prince Edward Island

'64 Parisienne CS "barn find" - last on the road in '86 ... Owner Protection Plan booklet, original paint, original near-mint aqua interior, original aqua GM floor mats, original 283, factory posi, and original rust.



Addicted!

Status: Offline
Posts: 165
Date:

they are a sonofagun aint they, I have 2 sets of these ,spent hours tapping and straightening the set on my car now, and there still not all that great imo..

__________________




A Poncho Legend!

Status: Offline
Posts: 48633
Date:

It seems to me I looked and there really is no good way to take it apart is there?

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



Canadian Poncho Superstar!

Status: Offline
Posts: 6749
Date:

No, on the 64s it is next to impossible. The outside wraps right around the ring.

__________________
Jerel


Addicted!

Status: Offline
Posts: 376
Date:

Hi again all
Jarel you were right you can file and sand these things. But they require a lot of filing to remove the deep gouges and I was getting worried that I was grinding too deep so I let up. It did not turn to bad, there's still some small marks on it and it's far from perfect.

A little while back I looked at taking one apart but soon realized that if i could unwrap the edge of the ring I would stand little chance getting it back together as nice as factory. I have three more of these beat up and scraped caps to practice on, so I am going to refine a few tools and try some other methods and have some fun.



Attachments
__________________

65 SD Convertible



Addicted!

Status: Offline
Posts: 395
Date:

I got a price on making 66 SD ones as a 17 wheel and they were 9000 US , lil much.

__________________


Guru

Status: Offline
Posts: 697
Date:

Lt1 Burb wrote:

I got a price on making 66 SD ones as a 17 wheel and they were 9000 US , lil much.


 The beauty of dog dish (as opposed to wheel covers I believe) is that they should fit any size wheel?



__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 9120
Date:

Lt1 Burb wrote:

I got a price on making 66 SD ones as a 17 wheel and they were 9000 US , lil much.


 Asking if that is all 4 or just one does not seem to matter lol



__________________


Addicted!

Status: Offline
Posts: 395
Date:

70 SS ACADIAN wrote:
Lt1 Burb wrote:

I got a price on making 66 SD ones as a 17 wheel and they were 9000 US , lil much.


 Asking if that is all 4 or just one does not seem to matter lol


 Yeah , I never asked because it didnt matter. 



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.