There was a thread with discussion on where to locate emblems on a particular vehicle. Todd has suggested that there be a section in each of the separate forums for particular models, so I will start one in each of those sections.
If you are able to assist with specs on body emblem placement for the models in this section, please post them in this thread.
__________________
1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles
1966 Grande Parisienne, 396 1 of 23 factory air cars
66 SD fender louver placement,just have template.....will give measurements when I find a tape!!! Template is also out for loan if anyone needs it,just pay shipping. Too many SD`s with louvers straight up!
Rear trunk molding surround 66-67 Canso. Both years in all Canso models(Canso 2 and 4dr sedan,HT,SD etc)...if you can't read measurements let me know. Can post pics a section at a time.
66 SD front fender louver measurements. Will edit thread when I measure distance between louvers. This template will work for both sides....just put your marked side down(facing fender) on right side.
-- Edited by hawkeye5766 on Wednesday 20th of December 2017 02:33:54 AM
-- Edited by hawkeye5766 on Thursday 28th of December 2017 02:03:00 AM
I'm hoping for someone to chime in here and say that 66 and 67 are the same. C'mon guys, someone's gotta know this. I bet they are but I don't want to steer you wrong!
__________________
1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles
1966 Grande Parisienne, 396 1 of 23 factory air cars
I know Carl deleted the 67 notation on the second post in this thread. But that was concerning the Canso emblem placement. 99.9 % that the SD emblem is in the same placement as 66 Sd. But the measurement posted is only for the left side !!!!!!!!!!!! Problem is that most transfer the same measurement over to the right side using the end of the "S" tail on the script to start the "C" on the other side. That does not work! The SD emblem is more forward on the right side than the left. This way the "Canso" emblem starts before the SD emblem on both sides. I know this is 66 and 67 had the "Canso" emblem on the front fender...but the 67 SD emblem mimics the 66 on the 1/4 panel. 1st pic is from orig brochure. You can see how much more forward the SD emblem is. Won't be able to give 100% on left side for 67....until I get to the Inlaws as she has a factory 67 SD