Photobucket
Photobucket
Members Login
Post Info TOPIC: Floor pan 1/2 sections


Uber Guru

Status: Offline
Posts: 3097
Date:
Floor pan 1/2 sections


Has anyone had any experience installing the floor pan full length 1/2 sections.   Goodmark or AMD

Did they actually butt up and/or overlap down the center of the trans-driveshaft tunnel?

do either of those brands differ in any dimensions?



__________________

Beaumontguru

MY BEAUMONT HAS 4 STUDDED TIRES AND 2 BLOCKHEATERS......AND LOTS OF OIL UNDERNEATH



A Poncho Legend!

Status: Offline
Posts: 39882
Date:

Dave, check with Gary, Fake68. I think he did those on his 67.

__________________
1966 Strato Chief 2 door, 427 4 speed, 43,000 original miles


Canadian Poncho Superstar!

Status: Offline
Posts: 6082
Date:

beaumontguru wrote:

Has anyone had any experience installing the floor pan full length 1/2 sections.   Goodmark or AMD

Did they actually butt up and/or overlap down the center of the trans-driveshaft tunnel?

do either of those brands differ in any dimensions?


 did the one 65 many years back. braces were good and its a lot easier to split the inner outer rockers to slide the pan in. 2 sides did not meet well in  the middle . One piece pan is the only way to go in my eyes



__________________


Uber Guru

Status: Offline
Posts: 3097
Date:

Ya i will have to talk to gary.  When you read up on them, some guys get the gap to line up and some guys dont.  Could be just a problem with the installer.

In my case dont want one piece, all braces and inner rockers are good, just the sheetmetal pans that are bad, but i mean bad!



__________________

Beaumontguru

MY BEAUMONT HAS 4 STUDDED TIRES AND 2 BLOCKHEATERS......AND LOTS OF OIL UNDERNEATH

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
.
.
.