2024 Canadian Poncho Calendars are Now Available! CLICK HERE

 

 

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Simple DIY steering wheel puller.


Canadian Poncho Superstar!

Status: Offline
Posts: 10063
Date:
Simple DIY steering wheel puller.


I needed the wheel off, and have misplaced my old diy puller. so here's a little post for content on this simple tool. No need to buy one.

Works well with the 64-66 wheel. Unsure what else it'll do, but you could drill the holes accordingly and add different bolts if necessary.

 

  • 3/16" thick 1 1/2" angle iron, 4 " or so long.
  • 2, 1/4-20 x 1 1/2" bolts (min). 1 1/2 length is perfect, any longer and you'll need spacers. 
  • 2, 1/4" flatwashers.

 

Find a old piece of angle iron, at least 1" wide and 3" long. I had some scrap 1 1/2 x 3/16. Angle iron as it is less likely to bend, the heavier the better. A wheel never off might need some good tension to break free.

Drill 2, 5/16" holes spaced 1 1/2" apart.

Undo the 3/4" wheel nut,

Attach the puller with the two 1/4-20 bolts. Tighten down evenly both sides back and forth until the resistance goes away... and you're free.

p4.jpg

p1.jpg

I drilled a 3rd hole to allow ne to hang the puller up.



Attachments
__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


A Poncho Legend!

Status: Offline
Posts: 20744
Date:

cdnpont wrote:

drilled a 3rd hole to allow ne to hang the puller up.


 Great idea. I was wondering what the 3rd. hole was for.smile



__________________

Prince Edward Island

'64 Parisienne CS "barn find" - last on the road in '86 ... Owner Protection Plan booklet, original paint, original near-mint aqua interior, original aqua GM floor mats, original 283, factory posi, and original rust.



Canadian Poncho Superstar!

Status: Offline
Posts: 10063
Date:

So it might not vanish again Darryl. And, oh, I also threaded a nut on each bolt so thy won't fall out.



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Canadian Poncho Superstar!

Status: Offline
Posts: 7418
Date:

I made something similar back in the late 70's to remove the Grant steering wheel adapter from my 57 Chevy. It utilized 3 bolts in a triangular pattern, and I'm sure it's still in the garage. I had a big hole in the center to clear the column shaft.

__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop
72 GMC Sierra

 

 



Guru

Status: Offline
Posts: 988
Date:

used to just smack the end of the steering column bolts in junkyards to get the buick wheels off-but it really screwed up the threads of the column-Carl and Gary taught me that-then I bought a steering wheel puller-was easy peezy and didn't damage anything

__________________


A Poncho Legend!

Status: Offline
Posts: 48634
Date:

68sd396rag wrote:

used to just smack the end of the steering column bolts in junkyards to get the buick wheels off-but it really screwed up the threads of the column-Carl and Gary taught me that-then I bought a steering wheel puller-was easy peezy and didn't damage anything


 Rookie..................! If you have the nut in exactly the right height and smack just the right spot you don't even damage it!



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars

MC


Canadian Poncho Superstar!

Status: Offline
Posts: 7500
Date:

I recall McGyvering something up to pull the wheel on my '60 Chev many years ago that involved stabilizer bar end links (had some spare parts in the drawer) and maybe a puller for a pulley?  Can't remember now, but it worked.  The signal switch had backed off and was no longer working, and that was the only way to get at it.  Wish I had taken pics, but it was before phone cameras and such... biggrin



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.