Didn`t take as may pics as i should have. Drivers side fender. Above the headlights is aluminum tape covered in body filler. Above the trim on the lower front in front of the wheel well is the same, as in the back lower corner in front of the door. The brace is rusted thru for the lowest 4 inches, and the nut that holds that corner to the car is welded/brazed/ and broken.
Finished front half Next post. Needs filler and some hammer & dolly work. Need to take photos of the reconstructed headlight area. Still looking for a bucket- any GM dual bucket will do. Anyone?
-- Edited by Eggwelder on Saturday 4th of December 2021 12:33:23 PM
-- Edited by Eggwelder on Saturday 4th of December 2021 12:37:13 PM
-- Edited by Eggwelder on Saturday 4th of December 2021 12:41:38 PM
-- Edited by Eggwelder on Saturday 4th of December 2021 12:57:56 PM
What years of buckets are the same? I have a set from a 62.
__________________
63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC. 1963- Pontiac top selling car in Canada
Mahone Bay, NS Still not old enough to need an automatic
Not sure what ones are identical, if any to a 58. The bucket stamping itself should be the same though, and i can make that work. If they are set wider apart its no issue, i can narrow it. if the headlights are bigger then i can`t use them
Thank you 66 Beau. Wait till you see what passes for the floor, hood inside bracing, and rockers.
Next project after this fender will be the passenger fender- couple dents and a touch of other work- a cakewalk compared to this one.
63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC. 1963- Pontiac top selling car in Canada
Mahone Bay, NS Still not old enough to need an automatic
63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC. 1963- Pontiac top selling car in Canada
Mahone Bay, NS Still not old enough to need an automatic
63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC. 1963- Pontiac top selling car in Canada
Mahone Bay, NS Still not old enough to need an automatic
I got a reply with someone who knows where there could be a good source of 58 parts in BC.
If interested, PM me with a number this guy can reach you at, he might have everything you need. I'll PM Mike Heavens with your number, or just come on the Facebook and reply directly with Mike.
Well, decided to redo the top patch on the driver fender. Watched a Wray Wellin (spelling?) on using the English wheel and figured I can do that too. Had an Eastwood wheel kit laying around for last 12 years so I finally made the frame this past fall. Never used a wheel before- I did mess around with it for an hour or so. Need a tipping wheel now unless someone knows how to turn the flange without one. Ill probably Fitzee the flange on this one. Will also be the first patch I TIG weld in as well. So I should be confident enough for that in another week or two of practicing not blowing holes. Starting with this
6 hours later this is what
-- Edited by Eggwelder on Friday 18th of February 2022 07:09:08 PM