Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Switching from a generator to an alternator.


Member

Status: Offline
Posts: 19
Date:
Switching from a generator to an alternator.


What's the process for switching my car from a generator to an alternator?



__________________


Uber Guru

Status: Offline
Posts: 3986
Date:

Did you swap in the V8 ?

__________________

Remember Fun,

 Remember Laughter ?

Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now


Canadian Poncho Superstar!

Status: Offline
Posts: 10416
Date:

Darryl's question is important. Is the 66 283 now in place? If yes, then it likely has a 10SI externally regulated alternator.

You could go the external regulator route, but I'd simply switch the 10SI for a 12SI internally regulated unit. It would be the easiest way to patch into your engine, engine to body harness. Dead simple wiring.



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Canadian Poncho Superstar!

Status: Offline
Posts: 5636
Date:

cdnpont wrote:

Darryl's question is important. Is the 66 283 now in place? If yes, then it likely has a 10SI externally regulated alternator.

You could go the external regulator route, but I'd simply switch the 10SI for a 12SI internally regulated unit. It would be the easiest way to patch into your engine, engine to body harness. Dead simple wiring.


 Very good advice to switch to an internal regulated alternator, very cheap and easy to find, get one for a mid 70s Chev. You dont use the voltage regulator on the rad support. Wiring schematic is readily available on a Google search. Does the 60 have an ammeter? Dont think you can wire that to work. 



__________________

63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC.
1963- Pontiac top selling car in Canada

Mahone Bay, NS Still not old enough to need an automatic



Canadian Poncho Superstar!

Status: Offline
Posts: 4524
Date:

You can bypass the ammeter on a one wire alternator conversion.  I did it on my 62 Parisienne before I sold the car in 2010. 

There are lots of info items online on how to do it, though I can't remember the details now. I'm thinking about doing it on my 55 Chevy for greater power and reliability. 



__________________

62 Catalina 2 dr post project

55 Bel Air 2 dr post 265PP/PG

68 Bel Air 2 dr post BB project

 



A Poncho Legend!

Status: Offline
Posts: 27222
Date:

I did the 1 wire conversion on my 54 Chevy. It was a simple conversion and worked great



__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 



Canadian Poncho Superstar!

Status: Offline
Posts: 5636
Date:

I just did a Google search and found this, some smart people on this post, including your 54 pic Todd.

canadianponcho.activeboard.com/t16794356/alternator-wiring/

__________________

63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC.
1963- Pontiac top selling car in Canada

Mahone Bay, NS Still not old enough to need an automatic

Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now


Canadian Poncho Superstar!

Status: Offline
Posts: 10416
Date:

Unsure where you'll find a dedicated ignition switched power wire in the 60 harness for the field. #1 connection. Not sure how it works at the generator or regulator. A 59/60 guy will know.

You could always just run a shunt over from the coil positive, provided it's a decent enough of a wire running from the coil to the cowl plug and up to the ignition switch.

The short wire from #2 terminal to the output lug is the "Sensing" wire. Shortening it in this manner will work just fine on a simple system. Imop, always go with the 3 wire style, the alternator will respond instantly to varying loads.

12si.JPG

 

 



Attachments
__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Poncho Master!

Status: Offline
Posts: 1738
Date:

cdnpont wrote:

Unsure where you'll find a dedicated ignition switched power wire in the 60 harness for the field. #1 connection. Not sure how it works at the generator or regulator. A 59/60 guy will know.

You could always just run a shunt over from the coil positive, provided it's a decent enough of a wire running from the coil to the cowl plug and up to the ignition switch.

The short wire from #2 terminal to the output lug is the "Sensing" wire. Shortening it in this manner will work just fine on a simple system. Imop, always go with the 3 wire style, the alternator will respond instantly to varying loads.

_______________________________________________________________________________________

In the past on older vehicles I used the alternator plug from an AMC application because it has a diode in the field wire. On older cars if you use the coil positive terminal to feed the alternator regulator you wont be able to shut the engine off because once the alternator starts charging it will back feed 12 volts to the coil, thats why the one wire alternator became popular on some applications.

 

Paul

 

 

 



-- Edited by Prefectca on Friday 31st of December 2021 01:02:33 PM

__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 10416
Date:

Ah, right you are Paul! Wonder if the better solution would be to just come off the fusepanel ign switched?

Is there not an ign switched wire at the regulator in the 60?



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Poncho Master!

Status: Offline
Posts: 1738
Date:

cdnpont wrote:

Ah, right you are Paul! Wonder if the better solution would be to just come off the fusepanel ign switched?

Is there not an ign switched wire at the regulator in the 60?


 You would need to wire to the accessory terminal if there is one on a 60, I cant remember its been awhile since I worked on one. I believe any terminal in the fuse box market ign will be on the same circuit as the ignition coil. There isnt an ignition input on a generator charging system. The generator produces voltage on its own when it turns and that voltage produced closes the contacts in the cut out relay inside the voltage regulator and starts the charging process. 
 I find it interesting that your wiring diagram shows the diode in the wire. The plug with the diode is still available and would be the easier way to wire it other than a one wire. I would use a one wire alternator, just make sure it has a small enough pulley so that it will charge at idle. If the one wire alternator doesnt turn fast enough the regulator wont kick in.

 

Paul



__________________


Poncho Master!

Status: Offline
Posts: 1738
Date:

I see that you can buy an anti feed back connector now.

https://www.ebay.ca/itm/Delco-Alternator-Anti-Feed-Back-Diode-Harness-Plug-10SI-12SI-15SI-27SI-Regulator-/191103912028

 

Paul



-- Edited by Prefectca on Friday 31st of December 2021 02:59:58 PM

__________________
Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now


Canadian Poncho Superstar!

Status: Offline
Posts: 10416
Date:

I wonder what size diode you'd need. It would be dead simple to make one up yourself.

Amazon has the pigtail plug

We have an electronics supply in town that has everything.

 

How does the alternator field energize with no current going to that #1 plug Vince?



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Poncho Master!

Status: Offline
Posts: 1738
Date:

cdnpont wrote:

I wonder what size diode you'd need. It would be dead simple to make one up yourself.

Amazon has the pigtail plug

We have an electronics supply in town that has everything.

 

How does the alternator field energize with no current going to that #1 plug Vince?


 I have used diodes rated for 6 amps. They used to be cheap, less than a buck each. I bought the connector just for convenience because usually I needed the plug anyway. 

Paul



__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 10416
Date:

Interesting, thanks.



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Member

Status: Offline
Posts: 19
Date:

Happy New Year, guys.
Thanks for the input and the discussion in general on the alternator swap. (Most of which was in the passing lane for me).

The 283 engine is in.
Lots of challenges (READ: headaches) so far.

Anyway, I have all winter to get the project finished!
I'll let you know how it goes (or doesn't!)

Cheers,
Bake


__________________


Uber Guru

Status: Offline
Posts: 3986
Date:

Bake wrote:

Happy New Year, guys.
Thanks for the input and the discussion in general on the alternator swap. (Most of which was in the passing lane for me).

The 283 engine is in.
Lots of challenges (READ: headaches) so far.

Anyway, I have all winter to get the project finished!
I'll let you know how it goes (or doesn't!)

Cheers,
Bake


 Thats what we are here for. 

Why dont you start another post telling us about your car ? Im curious about it as Im in Toronto. 



__________________

Remember Fun,

 Remember Laughter ?

Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now


Guru

Status: Offline
Posts: 634
Date:

Interesting article, my generator is almost new but my charging light flickers at low rpm/idle and was thinking of changing to an internally regulated version anyway. Read the MAD articles a while ago on 1vs 3 wire options but all the discussion here is very helpful to understand the issues. Thanks!!

__________________


Member

Status: Offline
Posts: 19
Date:

Hey Uber Guru,
Thanks for your interest.
If you check out my User profile, I've explained a bit about my Vista top Parisienne.
I found it in a garage just of the Danforth in Toronto. Most people think barn finds are found in some remote location in the country. That's not necessarily so. This one was in a garage on Garnoch Street where it was parked since 1972. There are back alleys in that section of town and the car had been locked away all this time. A neighbour filmed our recovery and I've posted the link in my profile. Check it out!

__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 10416
Date:

I think we followed this car for wee a bit Sid when it was advertised for sale. What a find!



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


A Poncho Legend!

Status: Offline
Posts: 49727
Date:

Bake wrote:

 A neighbour filmed our recovery and I've posted the link in my profile. Check it out!


 I just watched the cool video. 

And then I read a whole pile of ridiculous, critical comments made by people who obviously don't have a clue......wow............ they bombarded you with idiocy.



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



Canadian Poncho Superstar!

Status: Offline
Posts: 10416
Date:

Some comments after the video are just mind numbingly stupid, my faith being restored somewhat by the limited good ones.

Was this 60 the one somebody (Ray?) here went to check on? Or was it a 59? I'm not sure, but I do know it did create quite a stir here.



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 
Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now


A Poncho Legend!

Status: Offline
Posts: 49727
Date:

cdnpont wrote:

 

Was this 60 the one somebody (Ray?) here went to check on?


 I had the same thought, isn't this that car?



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.