Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Body Tech Forum -> 69 2+2 Stripes - Revisited
Post Info TOPIC: 69 2+2 Stripes - Revisited
gtodrive


Guru

Status: Offline
Posts: 726
Date:
69 2+2 Stripes - Revisited
Permalink  

In 2016, the topic of stripe color and size, was previously discussed here. I am finally getting around to having new stripes done for my car. In the previous post, user 'Willard' supplied a photo of the original stripes on his 2+2, with a tape measure beside them. It gave a general idea of the stripe widths and gap sizes between the 3 stripes, but was not exact and would be a guess. I would like to come up with documented measurements of these stripes, before I spend money on having them made. I reached out to 'Willard', for an exact remeasure of his stripes (if he still has the car), but the last time he was on the site was January 11. I think 'Davepl' might have exact measurements, but he has not been on here since January 22. I know 'the dentist', with the white 69 2+2 427-390hp 4-speed, would also know. I met up with him when I lived in Michigan, and sold him an NOS quarter panel, but lost his information.no If anyone has the exact measurements or can get a hold of them, that would be great! It would also, be usable and documented information for future restorers! Thanks!



__________________
'69 427 2+2 Convertible
68 427


Poncho Master!

Status: Offline
Posts: 1985
Date:
Permalink  

I WILL CHECK AND SEE IF I HAVE SOME DOCUMENTATION FOR THE STRIPES. IF NOT, I HAVE A CAR WITH ORIGINAL STRIPES STILL ON IT AND CAN MAYBE GET SOME MORE PRECISE MEASUREMENTS FOR YOU.

I WILL CHECK INTO THIS OVER THE WEEKEND, SO GIVE ME A FEW DAYS IF NO ONE ELSE CAN HELP IN THE MEANTIME.

  MIKE



__________________

  
   MIKE
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
gtodrive


Guru

Status: Offline
Posts: 726
Date:
Permalink  

68 427 wrote:

I WILL CHECK AND SEE IF I HAVE SOME DOCUMENTATION FOR THE STRIPES. IF NOT, I HAVE A CAR WITH ORIGINAL STRIPES STILL ON IT AND CAN MAYBE GET SOME MORE PRECISE MEASUREMENTS FOR YOU.

I WILL CHECK INTO THIS OVER THE WEEKEND, SO GIVE ME A FEW DAYS IF NO ONE ELSE CAN HELP IN THE MEANTIME.

  MIKE

 No real hurry Mike. I really appreciate anything you can come up with. Thanks!



__________________
'69 427 2+2 Convertible
68 427


Poncho Master!

Status: Offline
Posts: 1985
Date:
Permalink  

HERE IS WHAT I CAME UP WITH,

1969 2+2_1.jpgDSC_0034_1.jpgDSC_0036_1.jpg

FROM THE TOP

WHITE STRIPE IS 1/8"

1/8" GAP - BODY COLOR

SILVER STRIPE IS 1/4"

1/4" GAP - BODY COLOR

BOTTOM SILVER STRIPE IS CONSISTANT 3" UNTIL THE REAR QUARTER, REAR QUARTER STARTS AT 3" AND TAPERS DOWN TO 2" IN-LINE FROM WHERE THE UPPER 2 SMALLER STRIPES END.

HOPE THIS HELPS.



Attachments
__________________

  
   MIKE
gtodrive


Guru

Status: Offline
Posts: 726
Date:
Permalink  

Thanks Mike! It does help a lot! I also contacted 427pont and he said he would get back to me with some measurements too. Thanks again for the pictures and measurements!

Rob



__________________
'69 427 2+2 Convertible
Jacob


Addicted!

Status: Offline
Posts: 107
Date:
Permalink  

great info Mike have been looking for this information as well as im painting my car this year.

__________________
1969 2+2
gtodrive


Guru

Status: Offline
Posts: 726
Date:
Permalink  

I would like to thank Dave (pont427), who owns the low mileage white, 69 2+2, 390hp 427 4-speed, and Mike (68 427), who also owns a low mileage 69 2+2, for their help in assembling the following measurements and pictures from their factory original striped cars. I have outlined the measurements in the attached images. If anybody would like a PDF of this information, PM me your email and I will send it to you. I know this is not information that is needed by the majority of members, but for those of us 69 2+2 owners, hopefully it will be helpful.

Page 1.jpgPage 2.jpgPage 3.jpg



__________________
'69 427 2+2 Convertible
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
North


Guru

Status: Offline
Posts: 784
Date:
Permalink  

I went through all of this a few years ago getting my stripes figured out. They had been removed on my car but the original stripe overlaps in the jams and door edges front and rear were still present and I used them to size and position the stripes. I also found a bunch of factory paint and stripe photos to be able to figure out what the shape and taper were at the front and rear extremities. I installed the new stripes I had made at the height of the original overlaps. Mine were a bit higher than in your photos (more or less as the factory literature indicated they should go), perhaps there was some discretion left to the installer or perhaps they realized that the upper edge of the fat stripe was prone to lifting on the body crease so they lowered the placement. My car is a very early build.

p.s. the lighting makes the stripes look like they are all the same color but they are actually the correct two color set up. 

 

2021-05-25 040.JPG

2020-10-13 050.JPG



Attachments
__________________

John

Montreal 

29 1969 American Pontiacs

and a 1969 Canadian 2+2 Hardtop
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Body Tech Forum -> 69 2+2 Stripes - Revisited
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.