Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 64 Pontiac strato chief power steering conversion


Member

Status: Offline
Posts: 14
Date:
64 Pontiac strato chief power steering conversion


Hey y'all

I am in the middle of subject project. the car has a 230 straight six and standard 3 speed on the tree. I have all of the power steering pump and hardware including the adapter plate for the frame. I did the same swop a few years ago on a 1960 start chief after I did a big block swop,and it worked out fine. I am on the hunt for a 605 steering box for my 64,...I used 1 out of a 1978 Lemans when I did the 60. I've been checking every salvage yard here in NS,...but no one has much of the old stuff anymore. I'm on a limited budget and really cant throw big dollars at this old girl so if anyone knows or has 1 they want to sell please dm me....9023045446

 

summer pontiac (1).jpg



Attachments
__________________


Guru

Status: Offline
Posts: 961
Date:


Hi... Maybe try a 90-94 Jeep Cherokee, (If my memory is correct, check the net). The Saginaw box was used for 25+ years in a bunch of cars, nobody will know, bolt right in.

Looking at Carl's post.... I think the frames all came with the four holes, so on the 3 hole box, one hole was not used?



-- Edited by LT1Caddy on Saturday 20th of April 2024 08:26:15 AM

__________________
Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now


A Poncho Legend!

Status: Online
Posts: 49691
Date:

Isn't the 605 the lighter box, the one that doesn't use the 4 bolts to hold the top plate on the box?

Let me look for pics.

If so, the 605 box only came out in the later years, maybe late 70's or early 80's?. In the earlier years I think they were all 800's.

And with that said, I've been wrong before...



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



Guru

Status: Offline
Posts: 656
Date:

4SPEED427 wrote:

Isn't the 605 the lighter box, the one that doesn't use the 4 bolts to hold the top plate on the box?

Let me look for pics.

If so, the 605 box only came out in the later years, maybe late 70's or early 80's?. In the earlier years I think they were all 800's.

And with that said, I've been wrong before...

CORRECT   LATE SEVENTIES , EARLY EIGHTIES

YOU COULD BUY THEM REBUILT AT A JOBBER

PRICE ???

 



__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 5627
Date:

Lloyd, do you have the pulley for the crank and the pump mounting brackets for the 230? Not sure if they are the same as for a v8 on a 230, I know the mounting brackets for a 235 were unique and hard to find/expensive.

__________________

63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC.
1963- Pontiac top selling car in Canada

Mahone Bay, NS Still not old enough to need an automatic



Poncho Master!

Status: Offline
Posts: 1906
Date:

From memory, 1994-98 Jeep Grand Cherokee is the one, not sure about the smaller Cherokee.

Thanks
Randy

__________________

Sherwood Park
Alberta, Canada

 



Guru

Status: Offline
Posts: 961
Date:

GLHS60 wrote:

From memory, 1994-98 Jeep Grand Cherokee is the one, not sure about the smaller Cherokee.

Thanks
Randy


 Correct.... OR 94-96 Impala SS, Caddy Fleetwood, Buick Roadmaster



__________________
Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now


Poncho Master!

Status: Offline
Posts: 1734
Date:

If I recall the 605 box has the same size output spline that fits the 1964 pitman arm. It would make an easier swap for that reason. But do also remember changing lots of 605 boxes because they usually were leaking. My own 1979 Malibu I swapped the 605 for an 800 series from a wagon because it was leaking.

__________________


A Poncho Legend!

Status: Online
Posts: 49691
Date:

Prefectca wrote:

If I recall the 605 box has the same size output spline that fits the 1964 pitman arm. It would make an easier swap for that reason. But do also remember changing lots of 605 boxes because they usually were leaking. My own 1979 Malibu I swapped the 605 for an 800 series from a wagon because it was leaking.


 Yes, that certainly was a common 605 weakness.



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



Guru

Status: Offline
Posts: 656
Date:

Prefectca wrote:

If I recall the 605 box has the same size output spline that fits the 1964 pitman arm. It would make an easier swap for that reason. But do also remember changing lots of 605 boxes because they usually were leaking. My own 1979 Malibu I swapped the 605 for an 800 series from a wagon because it was leaking.


 DID THE PITMAN ARM WORK ON THE REPLACEMENT BOX??



__________________


Poncho Master!

Status: Offline
Posts: 1734
Date:

OURWAGON wrote:
Prefectca wrote:

If I recall the 605 box has the same size output spline that fits the 1964 pitman arm. It would make an easier swap for that reason. But do also remember changing lots of 605 boxes because they usually were leaking. My own 1979 Malibu I swapped the 605 for an 800 series from a wagon because it was leaking.


 DID THE PITMAN ARM WORK ON THE REPLACEMENT BOX??


 Yes the pitman arm did fit the 605 (round cover held with a snap ring) steering box. The swap was popular thirty years ago when those steering boxes were plentiful and cheap. 



__________________


Poncho Master!

Status: Offline
Posts: 1734
Date:

IMG_8301.jpeg

IMG_8302.jpeg

https://www.performanceonline.com/1958-64-Chevy-Impala-Power-Steering-Conversion-Gear-Box-605-Series/



Attachments
__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.