Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: how to tell an sd


Addicted!

Status: Offline
Posts: 301
Date:
RE: how to tell an sd


Hey AK 67SD,

Yes there is a way to tell the Beaumont Custom's with bucket seats from Beaumont Sport Deluxes.    We now come to what I believes Carl mentioned earlier about information not widely known and once it became widely known then cloners will have an easier time faking cars.

Not sure how to pass on the information so "we" know and the cloners don't
Any suggestions???

Also you could order the Beaumont SD in option package format or seperate model with a bench seat.   Just because the Sports Option package included buckets didn't mean you had to order them.   You could drop options within the package to build the car of your dreams.

SD's with bench seats are very rare, I've seen only one car so far.

__________________
Dave Weir Member #1 Canadian Classic Chevelles & Beaumonts http://cdnclassics.chevelles.net/


A Poncho Legend!

Status: Offline
Posts: 48863
Date:

Would it be that blue bench seat SD that was on ebay you are talking about?

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



Poncho Master!

Status: Offline
Posts: 1911
Date:

Hi Dave, is the 'way to tell' some physical markings on the car or is it on the paperwork? so if you could order A51 and not have buckets, the bench SD you speak of was a 736 car? My question 'partially' was how do you know when looking at the production log which A51 meant 'sports option' and which A51 meant 'buckets'... is it build date specific or is there an 'asterix' somewhere? *edit, just read your post on the previous page, so it does seem to be build date specific, that is one reason i was asking about if any 'custom with buckets' were built during the 'sports option' production run...

The good advantage we have over our 'american made' counterparts is the existence of GM verification paperwork, so the concept of not letting cloners have access to that info isnt too much of a big deal, since anyone selling a canadian car will use the GM paperwork as verification, it enhances the cars value. American cars without available paperwork, and the years without 738 type vins (like a 69+ chevelle SS) are very susceptible to the cloners...

Cloners for those cars have to follow a very detailed set of differences, especially since they generally take an SBC car and try to fake a BBC car... the guys on Team Chevelle can generally shred any good fake, with only a few photos. The scary thing is that they are so good i think they can turn a real SS into a fake!!hahahaha!

andrew


-- Edited by ak 67sd at 12:31, 2008-06-20

__________________

Wpg, MB

Numbers don't match! Especially HP and ET.  http://www.cardomain.com/ride/496943 



Addicted!

Status: Offline
Posts: 216
Date:

I know back in 69 when i order my SD-396 beaumont that with the 325 hp you could only get the bench seat . The bucket and console only came with the 350 hp.so when you see a SD with bench seats it's a325 hp
the paper work I have show only sd car in 67 where the 2 door sport coupe v8 only vin# 73817 or 2 door conv. v8 only Vin# 73867.
Slink






__________________

slink

Otterville Ont.



Poncho Master!

Status: Offline
Posts: 1911
Date:

Slink do you have other pics of the 69 SD? Did it have factory stripes? someone on team chevelle is looking for pics of one....

andrew

__________________

Wpg, MB

Numbers don't match! Especially HP and ET.  http://www.cardomain.com/ride/496943 



Addicted!

Status: Offline
Posts: 216
Date:

My avatar picture is my SD-396 l ordered but that's the only picture and yes they our factory strips i have the brochure for 1969 beaumont and it has the picture of the SD-396 I built this tribute SD-396 beaumont here is a picture of it

Attachments
__________________

slink

Otterville Ont.



Addicted!

Status: Offline
Posts: 301
Date:

Ak 67SD et all,

Yes, Beaumont Customs with bucket seats were available during the Sports option package years of '66 and early '67 production.  The build date isn't the determining factor, its something else.   The build date is the yard stick to determine when the Sports Option package was discontinued.

Brad among a few others on this site, will atest to knowing some "key" information to determine "true factory" from the "cloned" or back yard built cars.   That's one of the reasons for this site, to have "knowledgeable people" you can go to to determine "true factory" from "clone".

I'm really not trying to be a pest about this, I'm trying to retain specific facts so we can keep the authenticity of "true factory cars" and weed out the "clones, tributes or recreations".  Call them what you will those cars will always be "wantabees" and not true contenders.

The more of them that get built the more they dilute the value and "muddy the facts" of what's factory true and what's been built since production stopped. 

I'm not a fan of these cars as you can tell.   I understand why people are building these cars, my problem comes down the road when they are being sold as the real deal.   While I don't own a Beaumont or a Pontiac car, I do own a "true factory 72 Chevelle SS.   So I'm in the same boat as any of you '66, early '67 or '69 Beaumont SD owners.   In my model year the SS package was an option on the Malibu coupe and convertible.

I believe it was Super Chevy magazine some ten years ago or so that stated "there are now more Chevrolet Super Sports in existence than Chevrolet ever built".   As long as Barret-Jackson keeps pushing "recreations" or "tribute" - you'll notice that Barret-Jackson never uses the words "clone or copy" when referring to these cars - the problem will still be there.

There can only be true originals all others are "fakes" or "copies".    Think of the authenticity of these cars in this light.    There is only one "Mona Lisa" and its value is deemed to be priceless, it has a high monetary value.

Now you can get "prints" or "copies" of the Mona Lisa while they look like the original they don't carry the same value.   If we "spill the beans" and publish everything we know about these cars, what happens to their value?  How can you tell the true from the false?  Do you guys want to pay top dollar for a car only to find out later it was just a normal model car?

Some one stated well at least GM of Canada can confirm the authenticity of our cars.   Well true, a clone can still be passed off as a real car.   A quick trip to PhotoShop and fake documentation is produced.    Also someone noted there are individuals and companies making VIN and cowl tag replacements.   

Add the new tags with proper information or "move the tags" from a true factory car that's been wrecked to a good donour and behold you have a "true factory car".    Is it really, well the numbers say it is.

Sorry I'm not trying to preach I'm trying to explain why some of this information is being "guarded" to stave off the problem seen in the old car hobby below the forty-ninth parallel.

I'm sure there's others at this site who know "key information" about the full size passengers cars (Grande Parisienne/Parisienne), intermediates (Beaumonts/LeMans) and sub-compacts (Acadian/Ventura) as well.  We didn't come by this information by chance, we spent a good deal of time looking at a lot of cars and documenting what we saw to get to this point.   then we cross referenced what we saw with other sources of information to confirm what we found.

We freely assist any and all owners in learning as much about their cars as possible.  Knowing information is one thing, passing it on is another.  My take on this subject is this, I use what I know to assist folks in attaining or documenting the car of their dreams.   Too know as much about that vehicle as possible.   I hate to see folks being taken spending a lot of money on a "wantabee".

You can tell by my marathon posts I spell out what mean and stand by it.  I leave no one wondering about my intentions, I'm up front with people and deal with them in an honest fashion.   My father always told me to deal with people the way you want to be dealt with and I stand by that philosophy.   That's the real deal.  When I'm wrong I freely admit it as I don't know everything.

I look forward to any and all comments.

__________________
Dave Weir Member #1 Canadian Classic Chevelles & Beaumonts http://cdnclassics.chevelles.net/


Poncho Master!

Status: Offline
Posts: 1911
Date:

Not sure where you are coming from on this post Dave, I think that since documentation is available for canadian cars then protecting secret tell tale items doesnt have the same 'holy grail' factor as it does for american built cars where no documentation exists, and where VINs do not authenticate SS codes for example.

I do own own a real 67 SD Beaumont. My car has original interior, vinyl top and sheet metal. If there are secret codes, then great, because my car has them and it is indisputable.

Having the emblems available in reproduction may lead to more and more sd clones, especially since right now it would be harder to restore custom than clone an SD. Generally people should buy a car based on the quality of the workmanship they see, there are really only a few models that have an intrinsic value based on the model... like a BBC SD for example, some would argue if the original motor is gone then what made it rare in the first place is gone and value is lost... nonetheless that is up the purchaser to determine the selling price... changing VINs/fraud however is against the law, cloning/tributes etc are not...

Its been market supply and demand (and lack of factory documentation) that has caused more SS's to be built, and with the value of a real numbers matching SS these days, it makes sense to drive a clone. There are really good fake build sheets, trim tags etc. out there, but generally Canadian built cars are more marketable and 'defendable' since anyone can verify documentation. Cloning and tributes arguably increase the value of the real ones, it increases the appreciation of the real ones...

I am not trying to find out your 'trade secrets', I was more so 'wondering' how someone can look at the production log book, see the code A51 and tell if its just 'buckets' or a 'sports option' ...if there are other 'books' or codes at Georges disposal to make that determination then it makes the verification of our cars even more absolute and we dont have to look at rag joints, fuel line diameters, steering, and other 'signs' to verify a car...which are all interchangeable anyhow...

andrew



__________________

Wpg, MB

Numbers don't match! Especially HP and ET.  http://www.cardomain.com/ride/496943 



A Poncho Legend!

Status: Offline
Posts: 48863
Date:

ak 67sd wrote:

Not sure where you are coming from on this post Dave, I think that since documentation is available for canadian cars then protecting secret tell tale items doesnt have the same 'holy grail' factor as it does for american built cars where no documentation exists, and where VINs do not authenticate SS codes for example.

I do own own a real 67 SD Beaumont. My car has original interior, vinyl top and sheet metal. If there are secret codes, then great, because my car has them and it is indisputable.

Having the emblems available in reproduction may lead to more and more sd clones, especially since right now it would be harder to restore custom than clone an SD. Generally people should buy a car based on the quality of the workmanship they see, there are really only a few models that have an intrinsic value based on the model... like a BBC SD for example, some would argue if the original motor is gone then what made it rare in the first place is gone and value is lost... nonetheless that is up the purchaser to determine the selling price... changing VINs/fraud however is against the law, cloning/tributes etc are not...

Its been market supply and demand (and lack of factory documentation) that has caused more SS's to be built, and with the value of a real numbers matching SS these days, it makes sense to drive a clone. There are really good fake build sheets, trim tags etc. out there, but generally Canadian built cars are more marketable and 'defendable' since anyone can verify documentation. Cloning and tributes arguably increase the value of the real ones, it increases the appreciation of the real ones...

I am not trying to find out your 'trade secrets', I was more so 'wondering' how someone can look at the production log book, see the code A51 and tell if its just 'buckets' or a 'sports option' ...if there are other 'books' or codes at Georges disposal to make that determination then it makes the verification of our cars even more absolute and we dont have to look at rag joints, fuel line diameters, steering, and other 'signs' to verify a car...which are all interchangeable anyhow...

andrew



Very well put Andrew. You saved me a bunch of typing.

As long as we can document them, let everyone build all the clones they want. After they they put the screws in my coffin lid, they are welcome to say "Yeah, and his car was ONLY a clone" all they want, I don't care.

As a matter of fact, they can say it now. The only reason I am opposed to clones is because of the crooks, and in this case (Canadian cars) there is no point worrying about it.


 



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



Newbie

Status: Offline
Posts: 4
Date:

Hello,

I have also built a SD 396 Tribiute, I trying to find a someone or find the Stripes for the car? Where did you get yours done?

thanks

__________________


Poncho Master!

Status: Offline
Posts: 1911
Date:

Rick Pawlus' phone number is: 250-477-1773. He supplies the letters and info for supply/install of the stripes... he's on vancouver island i believe...

andrew

__________________

Wpg, MB

Numbers don't match! Especially HP and ET.  http://www.cardomain.com/ride/496943 



Canadian Poncho Superstar!

Status: Offline
Posts: 6366
Date:

Hey Carl, that was my 67 SD396 on e-bay with a factory bench seat, real thing and documented, three local owners, a current member now owns it, another contacted at the time to tell me it wasn't an SD because it didn't have bucket seats ! documented and numbers matching 396/325 hp 2-speed powerglide on the column with bench seat.

 There is a 67 SD 396/325 4-speed 738 v.i.n. in Richmond hill with a factory bench seat, the car was in the chevelle report nov 1984 from Breslau at the time.

 I have a friend "original owner" with a 1966 malibu SS 327 4-speed bench seat, that's a 136 V.i.n. sold for Canada.

A51 just had to be deleted, and was somewhat common with Chevele SS due to what drag racers thougt was lighter.

Ken

Attachments
__________________


A Poncho Legend!

Status: Offline
Posts: 48863
Date:

That bench SD car was so cool. My friends and I all looked at that and went "wow", just when we thought we knew it all!!!

I also had no idea that a 136 Malibu could be had as a bench. I always thought they were bucket cars only. Again I would have lost money betting on that one.

All these gray hairs and still lots to learn...

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars

«First  <  1 2 3 | Page of 3  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.