I am looking for 64 paresienne parts rear drivers tail light bezel 2 sun visors passenger roof latch electric pump for roof working clock if possible
Wayne, are you looking for a new pump/motor for your top? Are there any other componets you need for the power top mechanism? Switch, lines, cylinders, etc. Norm
as long as the pump works, i dont know if i need anything else everything is there but the pump, so wont know until i try it i guess i do need a latch for the passenger side.
as long as the pump works, i dont know if i need anything else everything is there but the pump, so wont know until i try it i guess i do need a latch for the passenger side.
Wayne, do you have a picture of the latch on your car? I have some latches at home in Michigan. Can you look at the area where the pump mounts and see if it has two mounts on each end or one on one end and two on the opposite end. They refer to these pumps as either 3 or 4 mounts. The factory hole for mount point is about 1" in diameter. You also need to know if the plug attached to the factory harness is on the driver or pass side of the trunk. You will want the motor to be on the same end as the factory connector so that the pigtail from the motor comes out on the same end as the factory connector.
