Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Beaumont Power Steering


Veteran Member

Status: Offline
Posts: 83
Date:
Beaumont Power Steering


Seems like a dumb question,but I can't see why my replacement power steering pump doesn't work at idle or low speed.I bought a reconditioned pump at a recent swap meet and,as my old pump was an original but working fine I thought that I'd replace it with my new found treasure.Easy change as all the brackets were on,etc but when I fired the car up
and backed out of garage,found it really hard to steer,just like manual.But the faster I went,better steering was.Even when I stopped and revved motor to 2500 rpm,no power steering.I put about 1/2 Lucas power steering stop leak and 1/2 STP power steering fluid in.(old pump had about same mix).Belt seems tight.Any ideas out there?...Thanks....Wayne


__________________
Barney


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

Maybe thats why it was at the "Swap" Meet      I think you better "swap" it back wink

__________________

 



Poncho Master!

Status: Offline
Posts: 2063
Date:

you could have air in the system. Put the car up on stands and manually turn the wheels lock to lock. Keep checking the fluid and have the cap loose. Then start engine, shut off immediately, check fluid. I have had this problem but mostly with the hydrovac style pump.

__________________


Poncho Master!

Status: Offline
Posts: 1977
Date:

All power steering pumps have a relief valve and spring under the pressure fitting. Make sure the spring is there, the o-ring is on the relief valve and the valve is set correctly. You may want to take the valve and spring out of your old pump and put them in if they were working.
 It is a good idea to put a new o-ring on the valve when you install it.

 

__________________


Veteran Member

Status: Offline
Posts: 83
Date:

Thanks for all the help.I haven't had a chance to do anything today but I'll check out your ideas first thing tomorrow.

__________________
Barney


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

1967togo wrote:

Seems like a dumb question   




my old pump was an original, but working fine...



 



__________________

 



Canadian Poncho Superstar!

Status: Offline
Posts: 5682
Date:

SD 396 wrote:

All power steering pumps have a relief valve and spring under the pressure fitting. Make sure the spring is there, the o-ring is on the relief valve and the valve is set correctly. You may want to take the valve and spring out of your old pump and put them in if they were working.
 It is a good idea to put a new o-ring on the valve when you install it.

 



I think Brad's on the right track here. Yrs. ago I had a 51 Merc. P/Up w/Chevy pwr. I put a Chrysler Volare frt ent in it & had to change out the relief valve in back of pump!!!  Chrysler uses same pump but has diff. relief valve, took out GM valve & installed Chry. valve, worked PERFECT

 



__________________

Some times I wake up GRUMPY, but today I let her sleep in    !!!!!!!! BLACKSTOCK Ont.



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

Still seems like a lot of work, to fix something, that was not broke   lol 

__________________

 

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.