New project, new to forum

AShkolny · Member

New project, new to forum

59poncho · Poncho Master!

welcome aboard and thats a fine lookin car!! great idea with the clear coat, im a rat rod patina guy myself. I would caution about hydraulics unless you are putting a new frame or newish front and rear end. Its a rough ride for that old beast, i would look into bags? Or...what about channeling the car over the frame to get the lowwww look, that would be cool.

4SPEED427 · A Poncho Legend!

Welcome here. Is that car really as solid as it appears in the picture?

73SC · A Poncho Legend!

Wow what a great looking car.

AShkolny · Member

Bodywise she's fairly solid, only the drivers quarter is rusted through. There are other spots of rust through but not as major as the quarter panel. The cabin floors are shot although the trunk floor seems too be fairly solid still.

Here are some more pictures of her, these were taken before I recieved the car at the past owners yard:

As for the hydraulics, I'm still up in the air if I want to do them or not. I could bag it, I guess. I'm not sure what I could use for a donor for a front/rear end as I am still new to this car. I do however plan on swapping out atleast the front drums for discs, just for the added safety. I'm just not sure what I can use for that either, unless there are kits for this kind of swap? Thanks!

Beaumont4008 · Uber Guru

Welcome to the site, also from Winnipeg. Love those 50's stove bolts. Keep us posted with progress pics.

timbuk · Canadian Poncho Superstar!

that will be a cool car for sure,looks pretty good from the outside.62 gmc with 500 caddy eh? show us somw oics of that one also! welcome

Beaumont4008 · Uber Guru

Here is a link to a disc brake conversion for those early cars. Chevy would be the same.

http://www.chevsofthe40s.com/detail/21757/Chevy_FRONT_DISC_BRAKE_CONVERSION_CHEVY_CAR_INDEPENDENT.html

bob53 · Addicted!

Welcome from another Winnipeg-er, Looks like quite the project you have there
Is that car from portage la prairie by any chance?

AShkolny · Member

I'll be sure keep everyone posted with progress, although it will be slow. My GMC, as of now, is stripped down to the frame. I'm swapping suspensions with a newer truck. The Caddy 500 is still needing to be rebuilt, hope to have that one driveable by the late fall/early winter.

I will definately look into getting that conversion kit soon enough. Right now, I just plan on doing small things to her as it's sitting in a storage lot and I am unable to do bigger jobs on her. The place that it's sitting in frowns upon working on the cars, so unless I can find a storage place that is willing to let me work on it, I won't be able to accomplish any major work on it until my truck is finished.

Also this car was sitting in Newton, Manitoba for the past 2 years or so. About 25 minutes from Portage. I had seen this car on Kijiji and had taken a drive to see her about 3 weeks ago. I was undecided on it as I thought he was asking a bit too much, but he called me a few days ago with a price we both agreed on and he drove it right to where it sits now.

Here are a few pictures of what my truck looked like before I stripped it down and how it looks now.
On my Uncle's farm:

Front suspension is off, waiting for the new one to be installed. I'll also be taking out the rearend and putting in a Chev 3/4ton 14 bolt.

-- Edited by AShkolny on Wednesday 12th of May 2010 12:34:38 PM

48 poncho · Addicted!

check out fatman fabrication for your front end on your 54 i got a new front crossmember and shock towers for my 48 they do great work and know what they are doing i just sent them a picture and a few simple measurements and viola instant front end.
and welcome to the site

87 player bird · Poncho Master!

Welcome.

Fitz · Guru

welcome to CP.

Fitz.

Canadian Poncho · A Poncho Legend!

Welcome aboard. Cool project btw.

Stephenzone · Canadian Poncho Superstar!

welcome. always liked old Pontiac and GMC's

TINY · Guru

To bad you are so far away I know of a guy that has a fresh 500 caddy for sale for real cheap he had bills for $3000 I think you could get it for $1000

AShkolny · Member

I've been getting quotes on my caddy 500 and I've had as high as $6000+ and as low as $3000 for a stock build. I'm thinking mine will likely cost in the range of $4000 as the block has been recently machined and is just in need of being built. I wish I had the knowledge of building an engine as I would do it myself. Someday I'll experiment with a SBC 350 I picked up for $50.

I really shouldn't have all these projects being 19! It's a bit hard on the wallet, but that's why I have 2 jobs I guess...

Pontiacanada · A Poncho Legend!

AShkolny wrote:

I really shouldn't have all these projects being 19!

Ya, but at 19 you have all the energy in the world!
Welcome!
Nice rides!

Fitz · Guru

Pontiacanada wrote:

AShkolny wrote:

I really shouldn't have all these projects being 19!
Ya, but at 19 you have all the energy in the world!
Welcome!
Nice rides!

Well said!

Fitz.

hwscowboy · Guru

Cool car,nice to find a 2 door.The floor panels can be found on ebay,same for the rockers.Apparently you can use most of ther stuff for a 54 chevy from the firewall back.I know i'll be needing a set for my panel when i start on it.Also sms auto fgabrics for your seat material.

AShkolny · Member

hwscowboy wrote:

Cool car,nice to find a 2 door.The floor panels can be found on ebay,same for the rockers.Apparently you can use most of ther stuff for a 54 chevy from the firewall back.I know i'll be needing a set for my panel when i start on it.Also sms auto fgabrics for your seat material.

Alright thanks for the info, I'll definately be looking into new floors. As I was sweeping out some dirt, I managed to take out half of the back seat floors!

Rolilk · Guru

4= model year 1954
2011= model type two door sedan Pontiac Pathfinder deluxe
24326= sequential number of that model built that year.

By the way nice find, I looked at that car and didn't jump. Wanted it for the stainless its a nice car. Have fun and keep posting your progress no matter how fast or slow it seems to go. We all seem to love updates!

65wagon · Poncho Master!

AShkolny wrote:

I'll be sure keep everyone posted with progress, although it will be slow. My GMC, as of now, is stripped down to the frame. I'm swapping suspensions with a newer truck. The Caddy 500 is still needing to be rebuilt, hope to have that one driveable by the late fall/early winter.

I will definately look into getting that conversion kit soon enough. Right now, I just plan on doing small things to her as it's sitting in a storage lot and I am unable to do bigger jobs on her. The place that it's sitting in frowns upon working on the cars, so unless I can find a storage place that is willing to let me work on it, I won't be able to accomplish any major work on it until my truck is finished.

Also this car was sitting in Newton, Manitoba for the past 2 years or so. About 25 minutes from Portage. I had seen this car on Kijiji and had taken a drive to see her about 3 weeks ago. I was undecided on it as I thought he was asking a bit too much, but he called me a few days ago with a price we both agreed on and he drove it right to where it sits now.

Here are a few pictures of what my truck looked like before I stripped it down and how it looks now.
On my Uncle's farm:

Front suspension is off, waiting for the new one to be installed. I'll also be taking out the rearend and putting in a Chev 3/4ton 14 bolt.

-- Edited by AShkolny on Wednesday 12th of May 2010 12:34:38 PM

that reminds me when i did the frame on my 62 if you need any short cuts give me a shout

427carl · A Poncho Legend!

nice car should be a easy fix...

AShkolny · Member

Hey everyone,

I haven't been able to work on either of my projects recently due to working alot lately although I recently picked up a hood ornament for the Pontiac from another one being the same year:

I hope to get working on both of my projects soon. I hope to find a full time job soon enough to have the time to work on them!