Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> The Lounge -> Muncie question
Post Info TOPIC: Muncie question
Lemans64


Poncho Master!

Status: Offline
Posts: 2326
Date:
Muncie question
Permalink  

Hi Guys, rebuilding a muncie and need to know the steel speedo gear drive on depth. A measurement form the rear of the mainshaft to the rear of the speedo gear. 

Thanks.  Rick


__________________

64 Lemans, 4spd

Vancouver Island B.C.
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 48851
Date:
Permalink  

Rick

I thought I had a shaft with the gear on it but it seems I don't.

The service manual says-

"Position the speedometer gear to get a measurement of 4 7/8" from the forward side of the gear to the flat surface of the rear bearing retainer.

Does that help at all?

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars
Lemans64


Poncho Master!

Status: Offline
Posts: 2326
Date:
Permalink  

Yup that does help. Just that left and the tail housing can go back on, will be ready for the shelf, LOL, Or I might get enough energy to put it in maybe by spring. Thanks Carl  smile

-- Edited by Lemans64 on Sunday 5th of December 2010 01:12:00 AM

__________________

64 Lemans, 4spd

Vancouver Island B.C.
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 48851
Date:
Permalink  

Glad I could help.

I know what you mean about energy...!

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> The Lounge -> Muncie question
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.