Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Drip rail on 65 or 66 convert


Guru

Status: Offline
Posts: 922
Date:
Drip rail on 65 or 66 convert


I discovered that in 67 and up, there was a drip rail molded into the chrome door frame along the front edge of the vent window.  I don't have this in my 65 and have not seen it 66 either so does anyone know if 67 was the first year for this or do I possibly have the wrong door frame as they are identical to a 2dr hardtop, possibly a 4dr too.  Will 67 frame fit 65 66?  This area leaks bad at the roof joint, worse when the door is open. 



__________________

65 Custom Sport Convertible

Southern Alberta

NOS


Poncho Master!

Status: Offline
Posts: 1703
Date:

sounds like it may be a 'A' pillar seal. Runs up the windshield post and seals against the top when it is in the raised position. All convertibles had this but for some reason it sometime is  missing. Maybe because it was exsposed to the elements it deteriorated more quickly. Your application is 1 year only; in stock; cost $63.70 pair. Also there was a vertical glass run on the backside of the vent window. the top of this piece met at the same point;  cost $41.61 / pair

 

Dale  @ NOS

1-800-667-6200



__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


Uber Guru

Status: Offline
Posts: 3665
Date:

I know in my '67, the drivers door was changed sometime in it's life before I got it and it doesn't have the drip rail. The passenger door does have it. Yes, I get water in mine as well where the 2 seals join.

 I am not sure if this was the first year but I will take notice when I see a '65 or a '66 in the future!!!

 And since I did get all my seals new from NOS back in '95, maybe that is why they started the drip rail as the seals couldn't hold back the water and it started so spilling inside? 



-- Edited by 67Poncho on Monday 20th of June 2011 02:02:34 PM

__________________

Vincent Jr.



Guru

Status: Offline
Posts: 922
Date:

I have new A pillar seals where the top of the seal ends at an angle mating with the roof seal, but poorly.  Along with the incorrect vinyl roof and new rail seals that are too short, the leaks are everywhere.  These can be adjusted a bit but the "drip rail" I am referring isn't a seal but is part of the steel frame on the door and runs down the inside edge . . . can't see it on the outside.



__________________

65 Custom Sport Convertible

Southern Alberta



Member

Status: Offline
Posts: 13
Date:

I think you might be talking about the die-cast chrome frame in which the front quarter vent glass sits? Is that correct?

If so, I have only seen this once before and that's now on a 1966 Cadillac Eldorado a friend of mine has here.  His frames were quite corroded and he found a replacement set of excellent ones on an original 1965 Buick Electra.

So, I'm wondering if the "high line" cars, Cadillac & Buick got better sealing door frames? Maybe you can investigate that???

Just a thought

Ian

 



__________________


Guru

Status: Offline
Posts: 922
Date:

Previously thought this started in 67, but recently saw a 66 CS with the drip rail also.  Yet to find on a 65......



__________________

65 Custom Sport Convertible

Southern Alberta

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.