Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> General Electrical Forum -> Need Help on Turn Signals on a 52 Fleetleader
Post Info TOPIC: Need Help on Turn Signals on a 52 Fleetleader
Harley61


Veteran Member

Status: Offline
Posts: 37
Date:
Need Help on Turn Signals on a 52 Fleetleader
Permalink  

When I picked up the car the left turn signals would work but very slowly, the right did not flash but the front bulb was burned out so I replaced it, then it to flashed but slowly,Digging further I found it had a 2 prong 12 volt flasher installed, I bought a 3 prong 6 volt flasher and installed it then nothing worked.

Someone had replaced the original flasher socket with a new one but I can see only 2 wires going to it they also ran new wires from the socket to the turn signal switch,

I'm stumped



__________________
Harley61


Veteran Member

Status: Offline
Posts: 37
Date:
Permalink  

Figured it out!!!! someone had put in the 2 prong 12volt flasher into the 3 prong connecter and the back of the connecter was taped into the wiring with friction tape, when i removed the tape I could see there was not a third wire, by trial and error I found if I put the 2 wires opposite each other on the 3 prong 6 volt flasher everything worked

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
67Poncho


Uber Guru

Status: Offline
Posts: 3665
Date:
Permalink  

Glad you have it figured!!



__________________

Vincent Jr.
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> General Electrical Forum -> Need Help on Turn Signals on a 52 Fleetleader
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.