1965 gauge cluster

jonnyrose · Addicted!

1965 gauge cluster

oshawacliff · Poncho Master!

or the bulb got too hot and melted the plastic in front of the opening

-- Edited by oshawacliff on Thursday 27th of June 2013 09:58:57 PM

Turtle · Addicted!

If they are both the same shape (arrows pointing left and right) then someone has installed the wrong lens (small colored lenses behind the faceplate). It could also be that the signal light socket was installed in the wrong hole.

Lefty · Uber Guru

or someone put a coloured bulb in that side..

seventy2plus2 · Canadian Poncho Superstar!

I suspect that both left and right should be green, and that the high beam indicator should be red. As Turtle indicated, someone has mixed up the plastic lenses.

jonnyrose · Addicted!

yep wrong colored lens so I swaped it out.,now im trying to hook up all the wires under the hood,(what color is the oil sending unit wire and temp sender wire and generator light wire?)

jonnyrose · Addicted!

ok I think I found the temperature wire,GREEN WIRE? now onto the oit sender wire and charging wire.....

Lefty · Uber Guru

also it will say right on the back of the cluster. what colour the wire should be

if you need a green lense i can pull one out of this cluster

-- Edited by Lefty on Saturday 29th of June 2013 01:01:14 PM

-- Edited by Lefty on Saturday 29th of June 2013 01:02:18 PM

jonnyrose · Addicted!

ok ive got those figured out but under the hood,,,,,i have a bunch of wires sitting on the engine,trying to figure out which won is the oil sending wire as well as the charge wire? thanks for the other info

Lefty · Uber Guru

-don't know if this will help.
wiring engine.jpg wiring fuse panel.jpg wiring dash.jpg wiring rear.jpg

jonnyrose · Addicted!

that's perfect,just printed that off,thanks so much.....