Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> General Beaumont Discussion -> Quarter panel seal
Post Info TOPIC: Quarter panel seal
Canmat1


Member

Status: Offline
Posts: 20
Date:
Quarter panel seal
Permalink  

Hi guys. Is there supposed to be a rubber seal that goes between the quarter panel and quarter panel exstension?

__________________
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6043
Date:
Permalink  

67 Beaumont? Pretty sure it's a no.

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49995
Date:
Permalink  

Now how the heck did you figure it out to be a 67 Beaumont Jim???!!!

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
jlysholm


Guru

Status: Offline
Posts: 611
Date:
Permalink  

Canmat1 wrote:

Hi guys. Is there supposed to be a rubber seal that goes between the quarter panel and quarter panel exstension?

Are you referring to the void space below the taillights? I do believe there was a factory rubber gasket installed using staples.



__________________
"you can't burn out, if your not on fire" -Jim Morrison
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6043
Date:
Permalink  

Carl Stevenson wrote:

Now how the heck did you figure it out to be a 67 Beaumont Jim???!!!

 Looked at his 2 postings.biggrin and thought he was talking about piping with a bead, not as in gasket. Have seen both,but piping looks rediculous. Think hes talking from 1/4 to tail light?



-- Edited by hawkeye5766 on Thursday 2nd of March 2017 01:51:56 AM

__________________
Canmat1


Member

Status: Offline
Posts: 20
Date:
Permalink  

Sorry my bad. Yes it's a 67.

__________________
Canmat1


Member

Status: Offline
Posts: 20
Date:
Permalink  

Yeah I am referring to the space between where the qaurter panel exstension(I believe this is what it's called. It's the part the taillight mounts in and attaches to the back of the quarter) meets the quarter panel. Wondering if there is supposed to be a gasket or a piping type seal in there. It looks like it's a no ?

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
rabbit64cs


Canadian Poncho Superstar!

Status: Offline
Posts: 7183
Date:
Permalink  

yes, should be a gasket there.. in between .

i also use Duct seal on the bolts ,,then put the nut on.. keeps that sealed up nice , so no water gets in.

 

look up the gasket for a 67 chevelle .. you will see what you should  have ..



__________________

later...rog

AADD supporting member !!
I'm a collector...not a builder!!Located in sunny central Saskatchewan at the lakehead!
Canmat1


Member

Status: Offline
Posts: 20
Date:
Permalink  

Ahhh. Ok perfect thank you.

__________________
Canmat1


Member

Status: Offline
Posts: 20
Date:
Permalink  

Ok I found them. It looks like you can get a flat rubber gasket or a round piping type seal. What one do you guys think is best. I saw in an earlier post it was said the piping ones do not look good.

__________________
rabbit64cs


Canadian Poncho Superstar!

Status: Offline
Posts: 7183
Date:
Permalink  

i think you will be happier with the flat gasket type ..

it just gives you a little cushion to adjust / tighten the nuts to get a flush fit with 1/4  and extensions.

 



__________________

later...rog

AADD supporting member !!
I'm a collector...not a builder!!Located in sunny central Saskatchewan at the lakehead!
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6043
Date:
Permalink  

This is what I'm refering to as piping. Have actually seen it on a couple of Chevelle's.hmm
Image result for fender gasket piping



__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Canmat1


Member

Status: Offline
Posts: 20
Date:
Permalink  

Yikes!!ğ¬ Hahah

__________________
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49995
Date:
Permalink  

Just for the record, the GM drawing for the 1/4 extension shows nothing between the extension and the 1/4 panel.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Pontiacanada


A Poncho Legend!

Status: Offline
Posts: 20744
Date:
Permalink  

I know my '64 Parisienne has a rubber gasket.



__________________

Prince Edward Island

'64 Parisienne CS "barn find" - last on the road in '86 ... Owner Protection Plan booklet, original paint, original near-mint aqua interior, original aqua GM floor mats, original 283, factory posi, and original rust.

Canmat1


Member

Status: Offline
Posts: 20
Date:
Permalink  

My buddy has a 66. Had a look. No rubber in his but it's not original though.

__________________
norontcan


Canadian Poncho Superstar!

Status: Offline
Posts: 6989
Date:
Permalink  

No seal on my 65 CS

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> General Beaumont Discussion -> Quarter panel seal
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.