Save 5% at Vevor and Support Canadian Poncho!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> The Lounge -> Putting the "Bling" back into your aluminum rims,covers etc
Post Info TOPIC: Putting the "Bling" back into your aluminum rims,covers etc
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6086
Date:
Putting the "Bling" back into your aluminum rims,covers etc
Permalink  

Didn't know what section to put this under. Mod can move if more appropriate section. A few guys have been asking how to clean up aluminum so I thought I would post what I do to bring back crusty old rims/parts. You will need  Scrub brush.comet,gloves, aluminum cleaner(can get from welding supplier),scotch bright pad,Wicked polish, applying rag and removing rag. Wash rim with comet and scrub brush. Once fairly clean spray on aluminum cleaner and let sit for a minute then scrub with scotch bright pad,can start with a med depending on how much grit/grime is still on the rim,then move to fine. Rinse off with fresh water and see how it looks,may have to repeat a couple of times. Then apply wicked polish,you'll notice the rag getting black so fold it to a clean spot,will also have to do this when removing polish. Keep the rag clean or it'll smear the black over the area you just wiped. Took about 10-15min for this section,about 1/2-45 per rim. Hope this helps some of you guys cleaning up your old rims.  Doug will be looking at this thread....I think the word Scotch is in it twice!

20170513_123141[1].jpg

After alum cleaner

20170513_124542[1].jpg

After polish

20170513_125821[1].jpg

20170513_125841[1].jpg

 



Attachments
__________________
rabbit64cs


Canadian Poncho Superstar!

Status: Offline
Posts: 7183
Date:
Putting the
Permalink  

Deadly tech tip !

__________________

later...rog

AADD supporting member !!
I'm a collector...not a builder!!Located in sunny central Saskatchewan at the lakehead!
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
timbuk


Canadian Poncho Superstar!

Status: Offline
Posts: 8245
Date:
Permalink  

yes indeed thanks jim back in the day we would use ESPREE cleaner havent seen it for a while but you had to take the plastic caps off first.

__________________

http://canadianponcho.activeboard.com/t51640378/timbuks-first-invader/ http://canadianponcho.activeboard.com/t63146560/timbuks-second-invader/  vancouver island
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6086
Date:
RE: Putting the "Bling" back into your aluminum rims,covers etc
Permalink  

timbuk wrote:

yes indeed thanks jim back in the day we would use ESPREE cleaner havent seen it for a while but you had to take the plastic caps off first.

 My back in the day was Easy Off oven cleaner on the rims and trans fluid on the tires. Miss the old days when chemicals were chemicals.  Now we have less toxins...but have to do it 10x!!



__________________
GrtDanes


Poncho Master!

Status: Offline
Posts: 1438
Date:
Permalink  

hawkeye5766 wrote:
timbuk wrote:

yes indeed thanks jim back in the day we would use ESPREE cleaner havent seen it for a while but you had to take the plastic caps off first.

 My back in the day was Easy Off oven cleaner on the rims and trans fluid on the tires. Miss the old days when chemicals were chemicals.  Now we have less toxins...but have to do it 10x!!

You may of had to do it 10xs cause you never learned to do it  wright the first time. 

By the way I quit Scotch many yrs back.Im a die hard Crown Royal man.



__________________
"The pursuit of perfection is frustrating and a waste of time because nothing is ever perfect. The pursuit of excellence is commendable and worth while. Therefore strive for excellence, not perfection"
silver steak


Addicted!

Status: Offline
Posts: 311
Date:
Putting the
Permalink  

I really appreciate this Tech Tip, I purchased a one step Aluminum Cleaner from a local Auto Parts Store, wasn't impressed. I wanted to clean the aluminum wheels on my RV Bus.
I noticed yours are removed from the car, was this for easy access and work-ability ? Dose , or would the Aluminum Cleaner that you used hurt or damage the rubber if I left them on the Bus, I am concerned about not rinsing the inside tire?
Thanks for the info, yours look great.
Regards

__________________

New Brunswick , 1950 Pontiac Silver Streak 2 Dr Sedan, 1967 Beaumont, 1985 Sierra 1500 One Owner
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6086
Date:
RE: Putting the "Bling" back into your aluminum rims,covers etc
Permalink  

silver steak wrote:

I really appreciate this Tech Tip, I purchased a one step Aluminum Cleaner from a local Auto Parts Store, wasn't impressed. I wanted to clean the aluminum wheels on my RV Bus.
I noticed yours are removed from the car, was this for easy access and work-ability ? Dose , or would the Aluminum Cleaner that you used hurt or damage the rubber if I left them on the Bus, I am concerned about not rinsing the inside tire?
Thanks for the info, yours look great.
Regards

 Just an old rim I had lying around. Think the the alum cleaner has a small % of muriatic acid in it, just rinse with garden hose between the dualies and should be good to go.



__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
silver steak


Addicted!

Status: Offline
Posts: 311
Date:
Putting the
Permalink  

I like what you have hanging around, nice wheels, old school 70's +/- . Once the rain stops in the east, cleaning my RV wheels is my first automotive project, thanks again


__________________

New Brunswick , 1950 Pontiac Silver Streak 2 Dr Sedan, 1967 Beaumont, 1985 Sierra 1500 One Owner
bjburnout


Uber Guru

Status: Offline
Posts: 3118
Date:
RE: Putting the "Bling" back into your aluminum rims,covers etc
Permalink  

........have you ever tried this on bumper chrome.......have a 63 Belair with tarnished front and rea bumpers

and your Comet cleanser is making me wonder.......hmmmm



__________________

......big block, 4 speed, bench seat, it doesn't get much better

 happy motoring :burnout
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6086
Date:
Permalink  

bjburnout wrote:

........have you ever tried this on bumper chrome.......have a 63 Belair with tarnished front and rea bumpers

and your Comet cleanser is making me wonder.......hmmmm

Tried on my 57(orig chrome) wont bring the shine back, but have been using for years on rusty chrome...started out way back as a kid on rusty bicycle rims. Will get rid of the brown rust spots but wont bring back the shine. If you want your white walls back to white or your sidewall letters white.....best thing out there.



__________________
dcneric


Poncho Master!

Status: Offline
Posts: 1489
Date:
Putting the
Permalink  

On chrome I use an SOS pad. Comes out pretty good. Last night I started on the shower curtain halo for a claw foot tub I'm restoring. If I can remember, I'll post a pic tonight.

__________________

Eric - Regina, SK

The Projects:

1935 Chev 3 Window Std Coupe

1957 Chev 2dr 

1967 Mustang Convertible

1969 Firebird 350HO Convertible

1969 Camaro X11-V8

1969 2+2 was a 396

1969 2+2 427

1980 Harley FXWG

1982 Chevy Silverado

1986 CJ7 Jeep

 
Captain Beaumont


Poncho Master!

Status: Offline
Posts: 1832
Date:
Permalink  

Tip: do not use a scotch brite pad on chrome !

__________________

68 custom
68 deluxe
67 custom
67 SD convertible (1 of 1)
16 Colorado 4x4 Duramax

Long live the Canadian arrowhead >

 Edmonton,AB
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6086
Date:
RE: Putting the "Bling" back into your aluminum rims,covers etc
Permalink  

Bringing back an old thread. Cleaned up my Alcoa rims on the f350. Same process but I had to remove the dull clear coat first. Just used Aircraft paint remover to get rid of the clear. Spray on, let sit for 20 min, wire brush and then wash. Had to wetsand the rough areas where the clear had lifted. 220 then 400,600,1000,2000 then buff. Not mint..but it's a work truck....  About 1 1/2 hrs per rim. Removed clear on both rims 1 night...polished both the next.

 

IMG-5182.JPG  IMG-5183.JPG

 

IMG-5181.JPG



Attachments
__________________
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50237
Date:
Putting the
Permalink  

Is the aircraft paint remover still as good as it was way back when? I've been reading some forums and guys say it's watered down now, not near as effective.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
65Camino


Uber Guru

Status: Offline
Posts: 3981
Date:
Permalink  

Wish I had similar rims.

__________________

Remember Fun,

 Remember Laughter ?
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6086
Date:
RE: Putting the "Bling" back into your aluminum rims,covers etc
Permalink  

4SPEED427 wrote:

Is the aircraft paint remover still as good as it was way back when? I've been reading some forums and guys say it's watered down now, not near as effective.

 Had to apply 2 coats..; but still heard snap/crackle/pop like rice Krispies. All in all worked great! Bought some brush on paint stripper first and waited 20 min with nothing happening! Went online and they said wait overnight. So ..I applied another thick coat to wake up to the same! Didn't even soffen the clear coat!.  The clear on these rims is pretty thick so I was expecting at least 2- 3 coats. If I would have stayed with the bush on...I'd still be on the first rim!! So a thumbs up on the Aircraft remover.....



__________________
bjburnout


Uber Guru

Status: Offline
Posts: 3118
Date:
Permalink  

hawkeye5766 wrote:
4SPEED427 wrote:

Is the aircraft paint remover still as good as it was way back when? I've been reading some forums and guys say it's watered down now, not near as effective.

 Had to apply 2 coats..; but still heard snap/crackle/pop like rice Krispies. All in all worked great! Bought some brush on paint stripper first and waited 20 min with nothing happening! Went online and they said wait overnight. So ..I applied another thick coat to wake up to the same! Didn't even soffen the clear coat!.  The clear on these rims is pretty thick so I was expecting at least 2- 3 coats. If I would have stayed with the bush on...I'd still be on the first rim!! So a thumbs up on the Aircraft remover.....

 Can someone plz post a pic or a link to the aircraft paint remover.......smile



__________________

......big block, 4 speed, bench seat, it doesn't get much better

 happy motoring :burnout
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
canam


Veteran Member

Status: Offline
Posts: 61
Date:
Putting the
Permalink  

When in the trade we found that scratching the surface with red scotchbite or #80 sandpaper before applying stripper.We then covered the surface with a sheet of plastic and left over night. This method seemed to work the best.Strippers of today are definatly missing a key ingrediant.Always apply heavey coats.

__________________
Bill Rudow
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6086
Date:
RE: Putting the "Bling" back into your aluminum rims,covers etc
Permalink  

bjburnout wrote:
hawkeye5766 wrote:
4SPEED427 wrote:

Is the aircraft paint remover still as good as it was way back when? I've been reading some forums and guys say it's watered down now, not near as effective.

 Had to apply 2 coats..; but still heard snap/crackle/pop like rice Krispies. All in all worked great! Bought some brush on paint stripper first and waited 20 min with nothing happening! Went online and they said wait overnight. So ..I applied another thick coat to wake up to the same! Didn't even soffen the clear coat!.  The clear on these rims is pretty thick so I was expecting at least 2- 3 coats. If I would have stayed with the bush on...I'd still be on the first rim!! So a thumbs up on the Aircraft remover.....

 Can someone plz post a pic or a link to the aircraft paint remover.......smile

 Got from Bumper to Bumper auto supply   

 

IMG-4713.jpg



Attachments
__________________
bjburnout


Uber Guru

Status: Offline
Posts: 3118
Date:
Permalink  

hawkeye5766 wrote:
bjburnout wrote:
hawkeye5766 wrote:
4SPEED427 wrote:

Is the aircraft paint remover still as good as it was way back when? I've been reading some forums and guys say it's watered down now, not near as effective.

 Had to apply 2 coats..; but still heard snap/crackle/pop like rice Krispies. All in all worked great! Bought some brush on paint stripper first and waited 20 min with nothing happening! Went online and they said wait overnight. So ..I applied another thick coat to wake up to the same! Didn't even soffen the clear coat!.  The clear on these rims is pretty thick so I was expecting at least 2- 3 coats. If I would have stayed with the bush on...I'd still be on the first rim!! So a thumbs up on the Aircraft remover.....

 Can someone plz post a pic or a link to the aircraft paint remover.......smile

 Got from Bumper to Bumper auto supply   

 

IMG-4713.jpg

 Thanx Jim......smile



__________________

......big block, 4 speed, bench seat, it doesn't get much better

 happy motoring :burnout
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> The Lounge -> Putting the "Bling" back into your aluminum rims,covers etc
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.