Photobucket
Photobucket
Members Login
Post Info TOPIC: Power steering


Addicted!

Status: Offline
Posts: 151
Date:
Power steering


I would like to instal PS in the 65 beaumont I am working on. I have all the brackets pulleys, pump and PS box but the stud on the draglink is smaller than the hole on the PS box pitman arm. Do I need to change the pitman arm or the draglink and idler arm. I cannot change the pitman arms from one box to the other because the shafts are two different sizes manual is large and PS one is small 



__________________

65 SD Convertible



Canadian Poncho Superstar!

Status: Offline
Posts: 5956
Date:

You have 64 and 65 stuff. the 64 is smaller



__________________


Addicted!

Status: Offline
Posts: 151
Date:

6F1A3186-F6E5-4114-B857-6C37A4AF6347.jpegHere is a picture of the two side by side. The manual box has a larger diameter hole than the PS box. The drag links taper stud in the car measures 13/16 at base. The PS boxs pitman arm has a part number on it.



Attachments
__________________

65 SD Convertible



A Poncho Legend!

Status: Offline
Posts: 39406
Date:

Yes you need a power steering pitman arm. and be careful matching the linkage that you buy because the US models are not the same as the Canadian models in some cases.

__________________
1966 Strato Chief 2 door, 427 4 speed, 43,000 original miles
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
.
.
.