Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Power Train Tech Forum -> 327 rear main seal question
Post Info TOPIC: 327 rear main seal question
65 SD L79


Canadian Poncho Superstar!

Status: Online
Posts: 9486
Date:
327 rear main seal question
Permalink  

does the 327 small and large journal crank use the same rear main seal?



__________________
beaumontguru


Canadian Poncho Superstar!

Status: Offline
Posts: 4466
Date:
Permalink  

Yes, as far as i know all SBC rear mains are the same until you get into the 1986 one piece versions



__________________

Beaumontguru

MY BEAUMONT HAS 4 STUDDED TIRES AND 2 BLOCKHEATERS......AND LOTS OF OIL UNDERNEATH.  The other one has a longer roof.
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
65 SD L79


Canadian Poncho Superstar!

Status: Online
Posts: 9486
Date:
Permalink  

What brand is the best?



__________________
ARCADIAN


Poncho Master!

Status: Offline
Posts: 2671
Date:
Permalink  

I have only used Fel Pro

__________________
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50058
Date:
Permalink  

Fel Pro, Victor or original GM for me. All have been fine.

The one issue I've had with a rear main seal leak was when the crank had a minor amount of wear on it where the rear seal contact area was.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
beaumontguru


Canadian Poncho Superstar!

Status: Offline
Posts: 4466
Date:
Permalink  

Ya the blue(sometimes grey) felpro is what i always use.   i offset the seal from the parting line about a 1/4 inch and be sure to seal the parting surfaces.



__________________

Beaumontguru

MY BEAUMONT HAS 4 STUDDED TIRES AND 2 BLOCKHEATERS......AND LOTS OF OIL UNDERNEATH.  The other one has a longer roof.
ARCADIAN


Poncho Master!

Status: Offline
Posts: 2671
Date:
Permalink  

Yes beaumontguru is correct offset the seal and clean and seal the surfaces.

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
65 SD L79


Canadian Poncho Superstar!

Status: Online
Posts: 9486
Date:
Permalink  

All good info, thanx guys



__________________
65 SD L79


Canadian Poncho Superstar!

Status: Online
Posts: 9486
Date:
Permalink  

off topic but whos oil pump wound you use for a stock 283?



__________________
ARCADIAN


Poncho Master!

Status: Offline
Posts: 2671
Date:
Permalink  

mellings high volume

__________________
4SPEED427


A Poncho Legend!

Status: Online
Posts: 50058
Date:
Permalink  

70 SS ACADIAN wrote:

off topic but whos oil pump wound you use for a stock 283?

 I always use a stock pump, Melling brand. So far they've always been perfect.



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Power Train Tech Forum -> 327 rear main seal question
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.