Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: so the 66 Beaumont is getting a 396 and power front disc brakes


Canadian Poncho Superstar!

Status: Offline
Posts: 9402
Date:
so the 66 Beaumont is getting a 396 and power front disc brakes


what size of brake booster should i be getting 11" or 9" ?



__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 4822
Date:

9" is stock on a '66 with the single reservoir master cylinder. 1967+ reservoirs are 11". If you want stock appearance and are running drums (which you're not) run the 9" & single reservoir, otherwise run the larger vacuum reservoir with dual master cylinder.
Of course you have checked the space, right? The factory disk brake cars marked the start of the corner crunch valve covers on big blocks to deal with the issue of the longer double master cylinder, pushed out farther with the vacuum reservoir.

If I were in your shoes I would either try to replicate the look & function of a factory '67 disk setup or, I would just run a single bale dual reservoir MC together using later (1969+) single piston disk brakes either way. Proportioning valve needs to be placed with consideration for headers if desired.



-- Edited by CdnGMfan on Wednesday 13th of December 2023 02:27:49 PM

__________________

67 Chevelle Malibu Sport Coupe, Oshawa-built 250 PG never disturbed.

In garage, 296 cid inline six & TH350...

Cam, Toronto.


I don't judge a man by how far he's fallen, but by how far back he bounces - Patton

Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now


Canadian Poncho Superstar!

Status: Offline
Posts: 10415
Date:

My take is on any car that will be driven (not a points trailer queen), the brakes should never be limited to a stock presentation or appearance. 

Paradoxically, I've noticed over the years that the A body actually seemed to positioned the master booster slightly further outboard of the engine than the B. Or maybe the engine sat a little lower in relation?

Regardless, I think you'd have no trouble fitting the better looking 11" DelcoMorain booster, and that the BB valve cover "Crush" should never be required on a A.

66.JPG



Attachments
__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 


Canadian Poncho Superstar!

Status: Offline
Posts: 9402
Date:

CdnGMfan 

If I were in your shoes I would either try to replicate the look & function of a factory '67 disk setup or, I would just run a single bale dual reservoir MC together using later (1969+) single piston disk brakes either way. Proportioning valve needs to be placed with consideration for headers if desired.



-- Edited by CdnGMfan on Wednesday 13th of December 2023 02:27:49 PM


 I have the single piston calipers and spindles from a 70 A body complete set up. I will get an 11" booster with the stamp on it, dual master. just have to figure out the tubimg and valving. going with stock L78 manifolds



__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 9402
Date:

cdnpont wrote:

My take is on any car that will be driven (not a points trailer queen), the brakes should never be limited to a stock presentation or appearance. 

Paradoxically, I've noticed over the years that the A body actually seemed to positioned the master booster slightly further outboard of the engine than the B. Or maybe the engine sat a little lower in relation?

Regardless, I think you'd have no trouble fitting the better looking 11" DelcoMorain booster, and that the BB valve cover "Crush" should never be required on a A.

66.JPG


 I agree, 11" look way better Mark. Boy would I like to add A/C too like your picture



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.