Photobucket
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: wanna check out my rear end


Canadian Poncho Superstar!

Status: Offline
Posts: 4737
Date:
wanna check out my rear end


this is what i've been working on this winter. its a 87 f150 9in that i've narrowed down to 38in between the backing plates. i'm just waiting for the spring perches then i'll dry assemble and mockup in the chassis. the reason the shafts aren't the same lenghts is that i've centered the pinion.



__________________

sTevE

55 GMC, 70 Pontiac 2+2 rag



Poncho Master!

Status: Offline
Posts: 1961
Date:

That's really narrow. Are you sure your tires won't be in to far? smile
 Looks good. What a lot of work.

__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 4737
Date:

you know the old carpenters creed (measure twice cut once). according to the offset of the 10in wide rims and the BFG 295/50/15 this will gives me 1 1/2 outside the frame and 2 in inside the body. we will find out later this week if all was for naught.

__________________

sTevE

55 GMC, 70 Pontiac 2+2 rag



Canadian Poncho Superstar!

Status: Offline
Posts: 7111
Date:

boy steve your rear sure is phat !

__________________







Canadian Poncho Superstar!

Status: Offline
Posts: 4737
Date:

Does my rear still look phat. on subsequence part procurement for my rear end i've discovered that the rear end is out of a 67 1/2 ton with the brakes off a 87 f150. not bad for a $40. wrecking yard purchase for a 9in posi. only thing is that it is gear 2.73, but with the 454 pushing through a saggy 4speed the ratio should be adequate



__________________

sTevE

55 GMC, 70 Pontiac 2+2 rag



Guru

Status: Offline
Posts: 568
Date:

Looks wicked.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.