Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> looking for rear bump stops for my 70 2+2
Post Info TOPIC: looking for rear bump stops for my 70 2+2
Stephenzone


Canadian Poncho Superstar!

Status: Offline
Posts: 4767
Date:
looking for rear bump stops for my 70 2+2
Permalink  

i was looking for rear bump stops for the rag. napa no go. gm notta before 76 unless vette. on the net i checked out antique chev and impala bobs nothing again.  i can make the generic one from Energy Suspension work but i was hoping for at least one car to be stock. also do the rear coils have a rubber seat on the top or is it metal to metal. any suggestions


__________________

sTevE

55 GMC, 70 Pontiac 2+2 rag
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

MY 66 IS metal to metal   and a little plate and bolt  to hold bottom

__________________

 
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

Stephenzone wrote:

i was looking for rear bump stops for the rag. napa no go. gm notta


         whats a bump stop?



__________________

 
rarechev


Guru

Status: Offline
Posts: 648
Date:
Permalink  

are you talking about the rubber bumpers on each side of the frame arch?

__________________

Brighton,Ont.

 
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 48813
Date:
Permalink  

Yes, can you clarify please Steve?

I like digging for old stuff like that.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars
Stephenzone


Canadian Poncho Superstar!

Status: Offline
Posts: 4767
Date:
Permalink  

rarechev wrote:

are you talking about the rubber bumpers on each side of the frame arch?


underneath the rear frame arch to stop the axle from hitting the frame. one on each side about 4 in long 2 in high and 2 in wide with a bolt hole at each end to screw into the frame.



-- Edited by Stephenzone on Wednesday 9th of December 2009 11:36:05 PM

__________________

sTevE

55 GMC, 70 Pontiac 2+2 rag
Beaumont4008


Uber Guru

Status: Offline
Posts: 3932
Date:
Permalink  

Used or new ? I have a used set of my 69 Beaumont 10 bolt.

__________________
Stephenzone


Canadian Poncho Superstar!

Status: Offline
Posts: 4767
Date:
Permalink  

like new. but will go with used

__________________

sTevE

55 GMC, 70 Pontiac 2+2 rag
Beaumont4008


Uber Guru

Status: Offline
Posts: 3932
Date:
Permalink  

I see your after the top ones on the frame, I have ones that go on the diff and push into a slot, not the ones your looking for. 

Not sure on the 70's but the assy manual for 69 refers to a top rubber insolator for the top of the spring.

__________________
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 48813
Date:
Permalink  

I will try to remember to check it out tomorrow Steve.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10179
Date:
Permalink  

Tamaraz's on Ebay has them Steven.

Rather pricey at $18 USD. But they're a item that was not even available or repoped until just recently.

I ended up using two of the best used ones I had, and they were pretty worn and torn. Nothing was available then.

I'll bet Dale at NOS could get them. Or try Antique chevrolet in Oakville.

Axle bump stop

k00204.jpg

1736279326_a3d40e2152.jpg



-- Edited by cdnpont on Thursday 10th of December 2009 08:56:14 AM

__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

cdnpont wrote:

Tamaraz's on Ebay has them Steven.

Rather pricey at $18 USD. But they're a item that was not even available or repoped until just recently.

I ended up using two of the best used ones I had, and they were pretty worn and torn. Nothing was available then.

I'll bet Dale at NOS could get them. Or try Antique chevrolet in Oakville.

Axle bump stop

k00204.jpg

1736279326_a3d40e2152.jpg



-- Edited by cdnpont on Thursday 10th of December 2009 08:56:14 AM


        Cool    now I know...

 



__________________

 
2drpost


Uber Guru

Status: Offline
Posts: 3463
Date:
Permalink  

heard the energy susp. stops for jeeps are very close to the b-body ones steve.
i still don't have a set on the bel air frame yet.

no rubber seats are used on the front or rear b-body springs.

-- Edited by 69 belair on Thursday 10th of December 2009 09:38:09 PM

__________________

 
Stephenzone


Canadian Poncho Superstar!

Status: Offline
Posts: 4767
Date:
Permalink  

thanxs guys. i'll spring for the tamraz one. but i can wait awhile to see what else i'll need. the ones on my 55 truck look almost the same for bolt pattern.

__________________

sTevE

55 GMC, 70 Pontiac 2+2 rag
Stephenzone


Canadian Poncho Superstar!

Status: Offline
Posts: 4767
Date:
Permalink  

i was over at a friends shop crying about the bump stops and he pulled these out of a cupboard and asked if i could use them. only half a inch off and the steel strap is removable. they're for a ford but what the hell.



as per normal click happy

-- Edited by Stephenzone on Friday 11th of December 2009 02:01:08 PM

__________________

sTevE

55 GMC, 70 Pontiac 2+2 rag
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> looking for rear bump stops for my 70 2+2
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.