Carl is right on. For 1970 they switched to tapered-seat plugs. Looking at your engine there are a lot of things that show it to be a 1967 or prior: the open PCV system with the breather type oil filler cap, the dipstick location shows the block to be a 1962-67 Chevy II / Acadian, the style of fuel pump is 1966 or earlier style, and the center sump is again a 1st gen Chevy II / Acadian. Still that doesn't guarantee that the head has not been switched. The earliest 194 heads (1962-64) were the only factory heads to use siamesed exhaust ports. They also have small combustion chambers to maintain compression with the small displacement 194. The oil filler cap is forward on the valve cover, which is typical. The earliest versions of the 194/230 family had the oil filler cap more towards the center of the valve cover.
I have a 1968 250 block using a modified 1984 292 head with the hardened valve seat inserts. The original 1968 250 head is sitting in my shed, along with the stock intake & exhaust manifold. So, tapered seat plugs started for 1970 models, hardened valve seat inserts started for 1973 models (although unleaded fuel as a requirement didn't start until the 1975 models with catalytic converters).
According to the casting # on your block it appears the block is a 1973-79 Chevy 250. Casting #s can be found online at this link: http://www.inliners.org/ I didn't find anything on head casting #s there unfortunately. You might also try contacting Tom Langdon of Langdon's Stovebolt Engine Co. http://stoveboltengineco.com/
-- Edited by CdnGMfan on Thursday 26th of July 2012 02:16:03 PM
__________________
67 Chevelle Malibu Sport Coupe, Oshawa-built 250 PG never disturbed.
In garage, 296 cid inline six & TH350...
Cam, Toronto.
I don't judge a man by how far he's fallen, but by how far back he bounces - Patton
here in lies the rub.. i tossed the original 194 out 30yrs ago, when i got this motor from a friend it came out of a 65 Chevy 2 ( but it was not from that car)\ the valve cover is from my original 194 same with the sump. the dip stick was originally welded to the side of the oil pan the hole on the back (by firewall was crimped shut) i drilled the new dipstick hole when i had it out..
other thing different was double valve springs
motor before i pulled it
-- Edited by Lefty on Thursday 26th of July 2012 02:21:22 PM
__________________
Surrey BC
1963 Acadian Beaumont Sport Deluxe http://www.63acadian.com/
these are the plugs i used i dont think they were torqued correctly and thats why the treads are black and oily
Did your engine have a sputtering sound like it had a manifold leak before you yanked the plugs. I had that sound ... a loose plug. I put in a new set of plugs with anti-seize on them (or believe it or not - Milk Of Magnesia), tightened them down and the leaky sputter went away.
__________________
Prince Edward Island
'64 Parisienne CS "barn find" - last on the road in '86 ... Owner Protection Plan booklet, original paint, original near-mint aqua interior, original aqua GM floor mats, original 283, factory posi, and original rust.