I used the longer braided lines that came with the Wilwood C3 calipers. They worked fine with the inlet on the side of the caliper. Just needed a 90 degree fitting.
I think you might have to look into using 1970 Impala lines with the stock C3 calipers. The Impala line mount is further back than Corvette. Impala is approx 16 3/4" vs 14 1/4 for the stock C3 lines. I believe the caliper thread (7/16-20) is the same size. They should give you the reach you need.
__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT.
I used the longer braided lines that came with the Wilwood C3 calipers. They worked fine with the inlet on the side of the caliper. Just needed a 90 degree fitting.
I think you might have to look into using 1970 Impala lines with the stock C3 calipers. The Impala line mount is further back than Corvette. Impala is approx 16 3/4" vs 14 1/4 for the stock C3 lines. I believe the caliper thread (7/16-20) is the same size. They should give you the reach you need.
This is good info because I have a pair of Wildwood C3 calipers ready to go on the Grande shortly. Now at least I know I will be needing another braided set for install.
