Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Power Train Tech Forum -> 283 timing question
Post Info TOPIC: 283 timing question
woodytwoshoes


Addicted!

Status: Offline
Posts: 150
Date:
283 timing question
Permalink  

Hey all, have all the plugs out, turned the engine to no 1 cylinder at the top, lined up the timing marks to zero on the crank. The rotor points to no 7 cylinder. Makes no sense to me. any help or ideas would be most welcome,

Thanks

Woody



__________________
dboode
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50058
Date:
Permalink  

I'll do the basics in case you are doing something wrong, so don't laugh if what I say is obvious!

You know you have to have #1 to the top after the intake valve closes though, right?

You know the firing order is 1-8-4-3-6-5-7-2 ?

You know left front is #1, followed by 3, 5, 7 and right front is 2, then 4, 6, 8?

#1 wire goes into the distributor cap first tower left of the "window" on the cap?





__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
woodytwoshoes


Addicted!

Status: Offline
Posts: 150
Date:
Permalink  

yup, think that's all good, your going left and right as if your sitting in car right?

__________________
dboode
woodytwoshoes


Addicted!

Status: Offline
Posts: 150
Date:
Permalink  

seems everything i read is that if i have the no 1 at compression, the rotor should point to no 1?

__________________
dboode
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50058
Date:
Permalink  

woodytwoshoes wrote:

yup, think that's all good, your going left and right as if your sitting in car right?

 Correct, driver's side is left. NOT standing facing it like people sometimes think it's done.

 



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50058
Date:
Permalink  

woodytwoshoes wrote:

seems everything i read is that if i have the no 1 at compression, the rotor should point to no 1?

 So you pulled #1 plug out, then clicked it over until you had compression and lined up the timing mark? If so, then time to pull the distributor and put it back in on #1. Was this supposed to have been running this way?

And the vacuum advance is sitting in about the right spot i.e. you can't pull the distributor around far enough to have the rotor pointing at #1?

You did confirm the wires are in the right towers in the cap?



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
woodytwoshoes


Addicted!

Status: Offline
Posts: 150
Date:
Permalink  

ya im a bodyman not a mechanic so all this is a bit confusing, I have a top notch mechanic coming to make a house call today so i will video the start up and post if possible

__________________
dboode
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7766
Date:
Permalink  

I hope he has experience with a breaker point distributor.

__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
woodytwoshoes


Addicted!

Status: Offline
Posts: 150
Date:
Permalink  

oh ya he figured it out pretty quickly, got it to fire some, but someone had been fooling with the distributor and i need to loosen it and turn it. Its frozen solid so that's tomorrows job. any hints on getting it to turn would be much appreciated


__________________
dboode
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10569
Date:
Permalink  

Small pipe wrench on the neck, and a few LIGHT raps with a deadblow hammer. Switch direction, repeat until it starts to free up?



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7766
Date:
Permalink  

The rotor spins but the distributor body won't turn?
Did you loosen the plate that holds the distributor down?

__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
woodytwoshoes


Addicted!

Status: Offline
Posts: 150
Date:
Permalink  

got her loose by lightly tapping it side to side. tomorrow i will see if i can get the rotor to point to no 1 cylinder.

__________________
dboode
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Power Train Tech Forum -> 283 timing question
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.