Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> Beaumont Power Train Tech Forum -> pics of correct 64 valve cover bolts for TburgGM
Post Info TOPIC: pics of correct 64 valve cover bolts for TburgGM
beaumontguru


Canadian Poncho Superstar!

Status: Offline
Posts: 4472
Date:
pics of correct 64 valve cover bolts for TburgGM
Permalink  

this is the correct bolt and spacer.  the bolt is a 1/4 inch but has a smaller head size to accept a 3/8 socket. (correct smaller head one shown on the right).  the holddowns are same on all 50's 60s SBC's



-- Edited by beaumontguru on Friday 28th of October 2022 08:30:02 PM

Attachments
__________________

Beaumontguru

MY BEAUMONT HAS 4 STUDDED TIRES AND 2 BLOCKHEATERS......AND LOTS OF OIL UNDERNEATH.  The other one has a longer roof.
tburgGM


Addicted!

Status: Offline
Posts: 298
Date:
RE: pics of correct 64 valve cover bolts for GMTburg
Permalink  

Thanks Dave, greatly appreciated.

My 283 1964 Beaumont came with the larger washers and screws (versus a bolts).   Not sure why anyone would do that.  Has anyone seen screws holding the valve covers down, like in the attached picture?

Frank



Attachments
__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
beaumontguru


Canadian Poncho Superstar!

Status: Offline
Posts: 4472
Date:
pics of correct 64 valve cover bolts for TburgGM
Permalink  

Before about 1962 the valve covers used phillips screws and timing cover were flathead.    But a little wider head than in your pic.    

The larger speader washers started in 1967 i believe.



-- Edited by beaumontguru on Saturday 29th of October 2022 07:53:59 AM

__________________

Beaumontguru

MY BEAUMONT HAS 4 STUDDED TIRES AND 2 BLOCKHEATERS......AND LOTS OF OIL UNDERNEATH.  The other one has a longer roof.
DonSSDD


Canadian Poncho Superstar!

Status: Offline
Posts: 5733
Date:
Permalink  

On A body, before bolts all Ive ever seen is a large head Phillips screws. Just an FYI.

__________________

63 Parisienne sport coupe (The Big GTO), black, maroon interior, 409 4 speed; former owner of a 59 El Camino, 63 Corvette SWC, 62 Chev Bel Air SC.
1963- Pontiac top selling car in Canada

Mahone Bay, NS Still not old enough to need an automatic
beaumontguru


Canadian Poncho Superstar!

Status: Offline
Posts: 4472
Date:
Permalink  

DonSSDD wrote:

On A body, before bolts all Ive ever seen is a large head Phillips screws. Just an FYI.

 I corrected my comment,  you are right, the PHILLIPS heads were used on valve cover prior to about 1962.

As far as i know, none of the 64 and newer A-body cars ever had phillips valvecover screws tho,   always the small 3/8 socket bolts.



__________________

Beaumontguru

MY BEAUMONT HAS 4 STUDDED TIRES AND 2 BLOCKHEATERS......AND LOTS OF OIL UNDERNEATH.  The other one has a longer roof.
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> Beaumont Power Train Tech Forum -> pics of correct 64 valve cover bolts for TburgGM
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.