Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> Muffler hanger rivets
Post Info TOPIC: Muffler hanger rivets
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49987
Date:
Muffler hanger rivets
Permalink  

While we were away on vacation I visited a guy I had previously met when we went to Las Vegas. Those of you who are into Acadians and Novas may know the name John Piccola. He did a lot of reproduction parts over the years for 62-67 Acadian and Nova. One of the many things he had reproduced is the rivets for original GM muffler hangers. Most of you likely don't care two hoots about stuff like this but I enjoy when I can make little details correct. 

On the yellow Grande Parisienne I got from Ken, the OEM dual exhaust muffler hangers were there but the rubber on them had already been replaced with non-original rubber pieces (bolted together vs riveted) that are falling apart. Now I hope to find a proper style piece of rubber strapping and "rebuild" the OEM hangers using rivets.

20240404_223004[1].jpg



Attachments
__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
a421cat


Guru

Status: Offline
Posts: 648
Date:
Permalink  

I am machining my own for the tail pipe hangers on my 421 car.

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
cdnpont


Canadian Poncho Superstar!

Status: Offline
Posts: 10528
Date:
Permalink  

It's exactly this attention to detail that makes your cars so special Carl.

I tend to veer off and just do what makes it functional ,while saying to myself "nobody will ever know"

 

It great you were able to get some.

 



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 
LT1Caddy


Poncho Master!

Status: Offline
Posts: 1001
Date:
Permalink  


They look very familiar to a C2-3 Corvette item. I think they are reproduced by a guy in Pennsylvania, very similar.

__________________
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49987
Date:
Permalink  

Now I need to buy one of the special tools to rivet them. Either that or get my friend to make one on his lathe. It looks similar to this but the stem in the middle of the tip is more of a probe than this one.

t24.jpg



Attachments
__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
tburgGM


Addicted!

Status: Offline
Posts: 291
Date:
Permalink  

Carl, does John have more muffler hanger rivets to sell?

Frank



__________________
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49987
Date:
Permalink  

Yes he does, he had lots left. Do you just need a couple? I can spare that if you like. 



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> Muffler hanger rivets
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.