Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> Is a 69 B Tilt steering column rag joint different than non tilt?
Post Info TOPIC: Is a 69 B Tilt steering column rag joint different than non tilt?
cdnpont


Canadian Poncho Superstar!

Status: Online
Posts: 10464
Date:
Is a 69 B Tilt steering column rag joint different than non tilt?
Permalink  

I've managed to get a line on a 69-70 Tilt column that would be very welcome option in my 69. wink

 

Questions;

Is the rag joint different?

Will the standard steering wheel fit right on without any special adapter? I'd like a deluxe comfort grip or walnut wheel eventually, but until then..



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 
gtodrive


Guru

Status: Offline
Posts: 718
Date:
Permalink  

Tilt wheels are the best, glad you have a line on one! The rag joint is the same and the standard wheel will also fit. I believe all the wood wheels have some sort of adapter, but not tilt column specific.



__________________
'69 427 2+2 Convertible
Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7717
Date:
Permalink  

As Robert indicated, the rag joint is the same, but you'll need the flange for the bottom of the steering column.
On a non-tilt column the flange is part of the column, but on the tilt column it needs to be added for the column to mate with the rag joint.

__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
cdnpont


Canadian Poncho Superstar!

Status: Online
Posts: 10464
Date:
Permalink  

Thanks guys,

Good to know about the flange.



__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT. 
 
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7717
Date:
Permalink  

And to really screw you up, there are various flanges available.    Here's a photo of a 70 2+2 hdtp with tilt, and it's flange measurement.   7/8" from flange face to centerline of bolt.

Tilt Flange 70 2+2 2 with lines.JPG

I have a tilt column, but haven't gotten around to installing it.  It was missing it's flange, so the hunt was on a number of years ago.

The 7/8" flange measurement was determined by comparing the tilt to non-tilt column.

 



Attachments
__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
seventy2plus2


Canadian Poncho Superstar!

Status: Offline
Posts: 7717
Date:
Permalink  

It'll look something like this

Tilt Flange 5699294 from Classic Muscle.jpg



Attachments
__________________
70 2+2 convertible
70 2+2 hardtop
70 Parisienne hardtop

 

 
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49901
Date:
Permalink  

seventy2plus2 wrote:

 

I have a tilt column, but haven't gotten around to installing it.  It was missing it's flange, so the hunt was on a number of years ago.

The 7/8" flange measurement was determined by comparing the tilt to non-tilt column.

 

 Do you still need a flange? I can get you one on my next wrecking yard visit if you do.



__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> Is a 69 B Tilt steering column rag joint different than non tilt?
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.