|
Does anyone have tips on using Dye
(Preview)
After trying to nurse my arm rests back to health I decided to order replacements. They are very brittle and turning to dust. The problem is that I can only find the new 18 inch armrests in black so that's what I bought. 12 inch are available in all colours. I am not the best with paint but I ordered the corr...
|
ABC123
|
14
|
3496
|
|
|
|
Finally found and installed tilt column
(Preview)
After a couple of years of searching and searching over a month ago in the top sponsor add by Ebay there it was: somebody selling a tilt column from a 67 Impala! To make a long story short, the price was reasonable and I bought it. Had to lube the lower bearings, open it up and tighten the 3 bolts holding the t...
|
Leo2+2
|
15
|
3071
|
|
|
|
67 Parisienne heater core question
(
1 2
)
(Preview)
This car is a non ac car. Well went for a drive last night and the heater core started leaking! Im 43 years old and this is my first heater core! (interesting fun fact) The question is are replacement cores good quality? Or is it smarter to rebuild the original?
|
SGS Welding
|
25
|
5499
|
|
|
|
68 Full size pontiac AM/FM radio
(Preview)
I have an AM/FM radio from a 68 Full size pontiac, it has a seperate Amp box that has a brown wire. Can anyone confirm what the brown wire is for? Is it a power wire? Thanks.
|
68 Greg 511
|
13
|
3249
|
|
|
|
Pictures for a site member (you know who you are!)
(Preview)
The rest of you, just ignore I'm trying to email these to a site member and they won't work, so I'll post them here.
|
4SPEED427
|
4
|
2291
|
|
|
|
Special fiber optic lucite wiring
(Preview)
67 Pontiac Parisienne I had to replace my ignition switch awhile ago, after reading my shop manual it describes this "special" wiring, Is that built into the switch? or did I misplace this piece? reason I ask the ash tray and cigar lighter don't seem to be properly lighted? thanks guys
|
SGS Welding
|
10
|
2649
|
|
|
|
More Photos Added - Just picked up a Pontiac Tachometer (Knee Knocker?)
(Preview)
Just got this off ebay $187.00US complete with wiring harness. Just have to work out where to mount it, steering column, console, any suggestions? -- Edited by Mavros on Monday 22nd of May 2017 01:37:26 AM
|
Mavros
|
7
|
6044
|
|
|
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
|
|
Variable speed wiper switch for 2 speed wipers
(Preview)
I was looking for a variable speed wiper solution so that I could retain the original switch. This looks like a reasonable solution using the original wiper switch. The have many other options for where you could use a variable switch http://www.revolutionelectronics.com/Products/ http:...
|
oshawacliff
|
0
|
1305
|
|
|
|
67 Parisienne Convertible glove box
(Preview)
My cardboard glove box is not pretty anymore. Do I order a replacement for an Impala? Or a Catalina?
|
SGS Welding
|
7
|
2120
|
|
|
|
68 Pontiac Parisienne Tachometer
(Preview)
Hi all, I am looking for a tachometer to install in my 68 Pontiac Parisienne but I have no idea what came as an option for this? Were they the knee knockers, mounted on the column or in the instrument cluster? If you have any photos you could post it will be greatly appreciated. Does anyone have one they wo...
|
Mavros
|
13
|
3564
|
|
|
|
Restoring a 60's vintage GM 6 way power seat unit.
(
1 2
)
(Preview)
For those who might be interested, In this post I'll try to document the refurbishing and (I hope) installation of a 6 way power seat in my 67 Grande. I picked up this unit a few years ago. It was included with a complete full size front bench, the vintage of which I'm unsure, although from the pattern on...
|
cdnpont
|
28
|
18617
|
|
|
|
1969 Parisienne headliner colour question - feed back wanted
(Preview)
So my 69 Parisienne had the headliner destroyed by mice. I have purchased a replacement white headliner as the light green is not available and the SEM colour match comes out yellow. Incorrect code. Do I just install the white headliner and live with it or are there any other custom vinyl dye choices?...
|
dcneric
|
13
|
2264
|
|
|
|
Help please identifying this 4 speed shifter boot
(Preview)
I bought this boat a while back with a bunch of 1967 B body parts. I know it's not correct for my car. Could anyone help me identify the correct application? It is brand-new so either it is a reproduction or NOS. it has F5 moulded into the underside. I will probably end up selling it to find my purchase of...
|
Mondo Poncho
|
10
|
2622
|
|
|
|
1967 B Body Tachometer- what is correct?
(Preview)
What choices did a buyer of a brand spanking new 1967 Parisienne 2+2 have if they wanted a 4 speed transmission AND (heaven forbid) a Tachometer? I LOVE the hood tach but those seem to be U.S. cars only. The knee knocker style I (should) have pictured below might be correct for 1966 model year but not 1967...
|
Mondo Poncho
|
3
|
1315
|
|
|
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
|
|
68 Headrests...
(Preview)
Need to know if A and B body headrests are the same? Also....what other years interchange? Thanks
|
MoboMac
|
15
|
2829
|
|
|
|
Mini Tach Instal in Dash of my 67 Impala
(Preview)
I mention to Exeltec that I would like to find a way to hook up the Smiths tach that I had and they suggested a small one from Princess Auto that only cost 35.00. I went over and picked it up and took it to the shop and Mike who has been doing most of the work on the car said that they could pull the instrument clu...
|
oshawacliff
|
10
|
2474
|
|
|
|
Bucket Seat Interchange....
(Preview)
Looking for a 68 power bucket seat track.... What are the interchange years....? See my Wanted post.....in the classifieds
|
MoboMac
|
0
|
1109
|
|
|
|
67 parisienne glove box lock removel
(Preview)
The lock on the glove box does not want to open with the key, I have cut open the inside to gain access but can't feel anything to help unlock. Without driving it to locksmith, any advice or tips to open glove box?
|
MrBenda
|
5
|
1783
|
|
|
|
Rear seat removal in 67 Parisienne sedan
(Preview)
I fought with rear seat, what is technique for removal of rear seat in 67 Parisienne sedan?
|
MrBenda
|
6
|
1650
|
|
|
|
Ever changed just the foam from rear bench seat?
(Preview)
Hi guys The rear bench has always been on the soft side so I want to change the foam. The fabric is in pretty good condition so I don't want to damage it. Any hints on how to unclip and open up the seat to remove the foam keeping in mind I want to keep the existing fabric?
|
Leo2+2
|
11
|
1540
|
|
|